Waste electrical and electronic equipment (WEEE) contains economically significant levels of precious, critical metals and rare earth elements, apart from base metals and other toxic compounds. Recycling and recovery of critical elements from WEEEs using a cost-effective technology are now one of the top priorities in metallurgy due to the rapid depletion of their natural resources. More than 150 publications on WEEE management, leaching and recovery of metals from WEEE were reviewed in this work, with special emphasize on the recent research (2015-2018). This paper summarizes the recent progress regarding various hydrometallurgical processes for the leaching of critical elements from WEEEs. Various methodologies and techniques for critical elements selective recovery (using ionic liquids, solvent extraction, electrowinning, adsorption, and precipitation) from the WEEEs leachates are discussed. Future prospects regarding the use of WEEEs as secondary resources for critical raw materials and its technoeconomical and commercial beneficiaries are discussed.

Aminopolycarboxylates, like ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA), are chelating agents widely used in several industrial, agricultural, and domestic applications. However, the fact that they are not biodegradable leads to the presence of considerable amounts in aquatic systems, with serious environmental consequences. The replacement of these compounds by biodegradable alternatives has been the object of study in the last three decades. This paper reviews the most relevant studies towards the use of environmentally friendly chelating agents in a large number of applications: oxidative bleaching, detergents and cleaning compositions, scale prevention and reduction, remediation of soils, agriculture, electroplating, waste treatment, and biocides. Nitrilotriacetic acid (NTA), ethylenediaminedisuccinic acid (EDDS), and iminodisuccinic acid (IDS) are the most commonly suggested to replace the nonbiodegradable chelating agents. Depending on the application, the requirements for metal complexation might differ. Metal chelation ability of the most promising compounds [NTA, EDDS, IDS, methylglycinediacetic acid (MGDA), L-glutamic acid N,N-diacetic acid (GLDA), ethylenediamine-N,N'-diglutaric acid (EDDG), ethylenediamine-N,N'-dimalonic acid (EDDM), 3-hydroxy-2,2-iminodisuccinic acid (HIDS), 2-hydroxyethyliminodiacetic acid (HEIDA), pyridine-2,6-dicarboxylic acid (PDA)] with Fe, Mn, Cu, Pb, Cd, Zn, Ca, and Mg was simulated by computer calculations. The advantages or disadvantages of each compound for the most important applications were discussed.

Siderophore production by Bacillus megaterium was detected, in an iron-deficient culture medium, during the exponential growth phase, prior to the sporulation, in the presence of glucose; these results suggested that the onset of siderophore production did not require glucose depletion and was not related with the sporulation. The siderophore production by B. megaterium was affected by the carbon source used. The growth on glycerol promoted the very high siderophore production (1,182 μmol g(-1) dry weight biomass); the opposite effect was observed in the presence of mannose (251 μmol g(-1) dry weight biomass). The growth in the presence of fructose, galactose, glucose, lactose, maltose or sucrose, originated similar concentrations of siderophore (546-842 μmol g(-1) dry weight biomass). Aeration had a positive effect on the production of siderophore. Incubation of B. megaterium under static conditions delayed and reduced the growth and the production of siderophore, compared with the incubation in stirred conditions.