This article describes the main improvements of the researches in Plastic Optical Fiber technology worldwide with focus on the development of commercial Graduated Index Perfluorinated Plastic Optical Fiber (GI PF POF) for data communications in order to reach better perfomance by lowering transmission losses (attenuation and dispersion).
Resumo: As estruturas de concreto, por meio da interação que possuem com o meio ambiente, estão submetidas a diversos tipos de agentes que ocasionam degradação. Um dos principais parâmetros utilizados para o monitoramento de estruturas é a resistividade elétrica. Este parâmetro sofre influência de diversos fatores como, por exemplo, grau de saturação, grau de hidratação e composição química do material. Este trabalho estuda o efeito da variação de tais fatores na resistividade, em três dosagens de concreto simples, sendo um o traço de referência (sem adição), e os outros dois com adição, o primeiro com cinza volante e o segundo com sílica de casca de arroz. Os resultados do trabalho mostram que quanto maior o grau de hidratação maior a resistividade do material independentemente do grau de saturação e tipo de adição. Neste contexto, quanto maior a resistência, a resistividade também é mais elevada. Ainda, os dois traços com adições apresentaram maior resistividade do que o traço de referência, com valores bastante elevados no traço com sílica de casca de arroz. Deste modo, é possível concluir que quanto mais ativa seja a adição incorporada, maior serão os valores de resistividade e proteção da peça de concreto.Palavras-chave: resistividade elétrica, absorção, resistência, cinza volante, sílica de casca de arroz.Abstract: Concrete structures, through interaction with the environment, are exposed to many types of agents, which cause degradation. One of the main parameters used for the monitoring of structures is the electrical resistivity. This parameter is influenced by several factors, such as degree of saturation, degree of hydration and chemical composition of the material. This work evaluates the effect of the variation of such factors on the resistivity in three concrete mixtures being the first a reference sample (without addition) and the other two with addition the first with fly ash and the second with rice husk silica. The results of the work show that the higher the degree of hydration, the greater the resistivity of the material, regardless of the degree of saturation and type of addition. In this context, the higher the resistance, the resistivity is also high. In addition, the two mixtures with additions presented higher resistivity than the reference sample, with very high values in the rice husk silica mixture. In this way, it is possible to conclude that the more active the addition, the greater the resistivity and protection values of the concrete.
Os elementos estruturais de concreto armado sofrem deterioração em zonas marítimas principalmente por íons cloreto. Diversos tipos de protetores de superfície podem ser aplicados para redução da entrada destes agentes deletérios e para que possam aumentar o tempo de vida útil da estrutura. O objetivo deste estudo é discutir sobre a escolha de qual o melhor produto de proteção de superfície para garantir bom desempenho quanto à absorção de água, corrosão e penetração de cloretos. Foram utilizados onze tipos de protetores que se dividem em três classificações: Formadores de Películas, Hidrofugantes de Superfície e os Bloqueadores de Poros. Para a tomada de decisão foi utilizada a Análise Hierárquica (AHP), a qual compara o desempenho dos protetores de superfície aplicados. Para a análise dos dados foi montada uma árvore de hierarquia para reduzir a subjetividade das comparações par a par e dar maior confiabilidade nas escolhas. Os protetores que obtiveram melhores desempenhos em ordem decrescente foram os vernizes poliuretânicos que são formadores de películas, em segundo foram os hidrofugantes de superfície à base de solventes e por último os bloqueadores de poros à base de silicato de sódio líquido. A Análise Hierárquica se mostrou uma ferramenta eficaz neste processo de decisão.
A autocicatrização em materiais à base de concreto ocorrem com o intuito de tamponar microfissuras que possa ocasionar a entrada de agentes deletérios para o material. Nesse contexto, o objetivo deste trabalho é estudar o microrganismo Lysinibacillus sphaericus e submete-lo a testes que comprovem a sua aplicabilidade em estruturas de concreto para atuarem como agentes de cicatrização. Para isso, o mesmo foi exposto ao crescimento em meio de cultura com diferentes pH's alcalinos. Depois, foi verificada a concentração dos microrganismos no meio de cultura pelo método da contagem por placas. Após essa etapa o microrganismo foi submetido ao crescimento por 14 dias em um meio de cultura líquido rico em cálcio para verificar a capacidade do mesmo em precipitar minerais de carbonato de cálcio. As investigações dos minerais precipitados foram feitas por DRX e MEV. A bactéria Lysinibacillus sphaericus precipitou o mineral carbonato de cálcio e apresentou crescimento em meio de cultura com pH alcalino, o que mostra que o microrganismo é apto a ser aplicado como agente de cicatrização em materiais de base cimentícia.
Resumo: A inspeção de estruturas de concreto demanda com frequência a determinação da resistência à compressão dos concretos in loco e, para tal, podem ser aplicadas técnicas não destrutivas que evitam danos significativos na estrutura durante o ensaio. Neste contexto, para verificar a adequabilidade do pull off como ferramenta de inspeção de concretos, o mesmo foi comparado com outras duas metodologias, esclerometria e ultrassom, também técnicas não destrutivas. As três técnicas não destrutivas foram aplicadas em 12 corpos de prova prismáticos de 65x32x10 cm, com 3 classes de resistência distintas (C20, C30 e C40). Seus resultados foram correlacionados com a resistência à compressão dos concretos, determinada por meio da ruptura de corpos de prova cilíndricos de 10x20 cm. As correlações se mostraram satisfatórias para os três ensaios. O pull off apresentou alto índice de correlação (R 2 = 0,91), porém inferior às outras duas técnicas: esclerometria (R 2 = 0,98) e o ultrassom (R 2 = 0,99).Palavras-chave: inspeção de estruturas de concreto; ensaios não destrutivos; esclerometria; ultrassom; pull off. Abstract:Inspection of concrete structures often demands the determination of the compressive strength of concrete in loco, and for that, non-destructive techniques may be applied to avoid significant damage in the structure during the tests. In this context, to verify the suitability of pull off as a concrete inspection tool, it was compared with two other methodologies, rebound hammer test and ultrasonic test, also non-destructive techniques. The three non-destructive techniques were applied in 12 prismatic specimens (65x32x10 cm) with three different compressive strength classes (C20, C30 and C40). Their results were correlated with the compressive strength of the concretes, determined by the rupture of cylindrical specimens (10x20 cm). Correlations were satisfactory for all three tests. The pull off test presented a high correlation (R 2 = 0.91), but lower than the other two techniques: rebound hammer test (R 2 = 0.98) and ultrasonic test (R 2 = 0.99).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.