aPaper performance qualities strongly depend on the origin of cellulose fibers. Awareness of environmental issues and sustainable development has led to the increase in the use of recycled printing papers. Recovered fibers are often used as a substitute for virgin wood fibers in the production of certain types of papers. As recovered fibers cannot provide the same quality level of paper products as virgin wood fibers, alternative sources of virgin cellulose fibers need to be identified. The aim of this research was to analyze the printability of laboratory papers made of different contents of straw pulp. Therefore, the printing papers were formed using straw pulp of three different cereal species (wheat, barley, and triticale) and mixing them with recycled newsprint in different weight ratios. The printability of these laboratory papers was analyzed by classifying dot reproduction quality based on four dot reproduction attributes. Printed dot reproduction greatly affects the quality of reproduction in graphic products, as dots are the most important element in multi-color reproduction of texts and images. It was confirmed that laboratory papers containing straw pulp provide the same or even better dot reproduction quality than laboratory control papers formed only of recycled newsprint.

The packaging and labels graphic industry is dominated by several main printing techniques, namely flexography, offset, gravure and digital printing. Each technique is suitable for a particular type of graphic product and differs in the way ink is transferred to the printing substrate and by the type of image carrier employed. Depending upon the printing process, the printing ink is transferred to the substrate either directly or indirectly. High-quality prints in analogue technologies are based on ink transfer from printing plate to printing substrate, while digital printing is based on inkjet or statical ink transfer directly to the printing substrate. Since the development of digital commercial printing in the mid-1990s, devices have emerged that can reproduce almost the same quality in any required application. Digital printing has created a revolution in the printing industry, where inkjet printing and electrophotography printing are fast-growing digital printing techniques. Inkjet printing is one of the most popular non-impact printing technologies, where printing is performed without

AbstractToday, the paper industry is faced with a global deficiency of raw wood materials, so alternative sources of virgin cellulose fibres are playing an important role in paper production. Agricultural countries produce large quantities of crop farming by-products such as straw, which is an interesting alternative raw material for cellulose fibres. Straw is used in many industries because of its numerous advantages: animal food industry, biofuel industry, construction industry and as artistic material. The potential use of straw production residues is of great importance in paper and printing industry. The focus of this research is on triticale straw, which was used as a non-wood fibre source for paper production. Namely, triticale straw was converted into semi-chemical pulp and was combined with recycled wood pulp in order to produce alternative laboratory papers. The usability of this kind of laboratory papers in printing industry was analysed based on line reproduction quality. This research evaluated and analysed line reproduction quality based on four line attributes: width, blurriness and raggedness. The results of this research proved that triticale pulp in laboratory papers has equal influence on line printing quality as the recycled wood pulp.

Nowadays, there is a strong initiative to use recycled or biodegradable materials in all aspects of production including the graphic industry. In this study, paper was used as a material fulfilling the two of mentioned properties. Under laboratory conditions, papers were made of 70% pulp from recycled wood fibres with an addition of 30% straw pulp (wheat, barley or triticale). Considering the importance of the possibility of printing such media based on their end use, the influence of fibre type on vapour barrier properties was studied and overall migration to hydrophilic and fatty food simulants was measured. Analyses were performed on digital, flexographic, and offset prints obtained by printing laboratory papers with UV-curable black ink. It was found that prints produced using the offset technique, in which the ink remains on the surface of the paper, had lower overall levels of migration compared to other printing techniques. The paper produced appears to have the potential to be used as a secondary food packaging material.

The use of non-wood fibres for paper production could be one of the most environmentally friendly and economical alternatives. Reducing the consumption of wood pulp in paper and cardboard production by replacing wood pulp with alternative plant biomass could be a viable solution, as the amount of non-wood fibres in biomass is far from being exhausted. In this study, straw from the most commonly grown agricultural crops in Croatia was used as a source of non-wood fibres. Agricultural residues from wheat, barley and triticale were selected as a substitute for wood fibres for the production of laboratory papers with straw fibres. Under laboratory conditions, straw pulp was mixed with recycled wood pulp in a ratio of 30:70 to produce paper sheets that can be printed with different printing techniques. Regardless of the printing technique used, it is desirable that the prints contain a high-quality reproduction of the image and text on the surface of the paper and that the ink does not penetrate completely through the substrate. In this context, this study observed the use of laboratory-made papers with non-wood fibres as the printing substrate by analysing the maximum depth of ink penetration into the printing substrate obtained with two printing techniques - a modern one (digital UV inkjet) and a very high quality conventional one (gravure). It was found that the gravure printing favoured a greater penetration of the UV ink into the substrate with the addition of straw pulp compared to the digital printing technique. However, this is a consequence of the printing technique, as similar ink penetration was also observed on the laboratory substrate made only from recycled fibres. Compared to commercial papers, the ink penetration is slightly higher into the laboratory made printing substrates. It is interesting to note that the printing substrate with the addition of 30% triticale pulp has the lowest ink penetration, especially in multicolour prints produced with the digital UV inkjet printing technique.