Highly oriented native cellulose fibres (flax) and softwood (pine) have been investigated by means of X-ray diffraction. Local structural information was obtained by using X-ray microbeams. Tensile tests were performed in situ, revealing a change of orientation of cellulose microfibrils in materials with tensile strain. In flax fibres, the microfibrils rotate during the first percent of stretching, into a more parallel orientation with respect to the fibre axis. For wood, a decrease of orientation with the onset of strain hardening is found for the first time.

The tensile properties of kraft cooked Norway spruce were studied by tensile testing with in situ X-ray diffraction (XRD). Samples were of earlywood, cooked for varying times. The total lignin content of the samples was between 21.7% and 9.3%. Tensile tests with XRD were performed on wet samples, without XRD on dry samples. The tensile strength, the modulus of elasticity (MOE), and the elongation at fracture/yield were determined. X-ray diffraction was used to determine the microfibril angle (MFA) and the deformation of crystalline cellulose by monitoring the reflections 200 and 004. The (X-ray) Poisson ratio of crystalline cellulose was calculated, both before and after the yield point. The tensile strength and the MOE of the wet samples were significantly lower than in the dry samples. The tensile properties of dry samples were similar to dry earlywood samples of untreated Norway spruce. The MFA only showed notable changes due to strain when it was initially large, when a diminishing effect was observed. The Poisson ratio of crystalline cellulose was negative. The average values ranged between -0.26 and -1.17 before the yield point and between -0.86 and -1.05 after the yield point.

No abstract

No abstract