The consumption of contaminated vegetables has a great impact on human health. Due to this fact, we conduct the study to estimate the heavy metals in groundwater, soil, and vegetables by using the atomic adsorption spectroscopy (AAS) and find out the health risk using THQ and TCR caused by using these vegetables. The mean concentrations of As (0.015–0.40 mg/L), Cd (0.02–0.029 mg/L), Co (0.31–0.38 mg/L), Cr (1.02–1.09 mg/L), Cu (2.14–2.17 mg/L), and Hg (0.01–0.04 mg/L) are high in groundwater from threshold values given by WHO. The mean concentrations of As (22.17–23.14 mg/kg), Cd (4.21–4.54 mg/kg), Cu (21.24–24.36 mg/kg), and Pb (32.12–33.48 mg/kg) are high in soil samples from threshold values given by WHO. The mean concentrations of As, Cd, Pb, Cr, Fe, Hg, and Mn values exceeded the recommended values with concentration ranges: 1.75–4.56, 0.41–0.67, 2.12–3.12, 1.44–4.56, 87.12–135.25, 2.09–2.64, and 33.41–129.32 mg/Kg, respectively. The vegetable sample’s average concentration of heavy metals was in decreasing order cabbage ˃ brinjal ˃ okra ˃ tomato. The EDI values for As, Co, and Hg calculated for both adults and children is high. The target hazard quotients (THQ) for As, Co, and Hg are greater than the threshold value by consuming vegetables, which indicated the health risk for both adults and children. Similarly, HI due to tomato, cabbage, okra, and brinjal’s consumption is ˃ 1, with HI values 8.1975, 15.3077, 8.7312, and 10.2306, respectively. This advised the possible health effect in this area by using these vegetables. Target Cancer risk (TCR) exposed the adverse cancer risk persuaded by As, Cr, and Hg as their values exceeded the normal range by USEPA by consumption of these vegetables. This study concluded that vegetables imply the total health risk on local people, and regular monitoring of heavy metals is strongly suggested in this region.

No abstract

No abstract

Fluoride contamination in water is a key problem facing the world, leading to health problems such as dental and skeletal fluorosis. So, we used low-cost multifunctional tea biochar (TBC) and magnetic tea biochar (MTBC) prepared by facile one-step pyrolysis of waste tea leaves. The TBC and MTBC were characterized by XRD, SEM, FTIR, and VSM. Both TBC and MTBC contain high carbon contents of 63.45 and 63.75%, respectively. The surface area of MTBC (115.65 m2/g) was higher than TBC (81.64 m2/g). The modified biochar MTBC was further used to remediate the fluoride-contaminated water. The fluoride adsorption testing was conducted using the batch method at 298, 308, and 318 K. The maximum fluoride removal efficiency (E%) using MTBC was 98% when the adsorbent dosage was 0.5 g/L and the fluoride concentration was 50 mg/L. The experiment data for fluoride adsorption on MTBC best fit the pseudo 2nd order, rather than the pseudo 1st order. In addition, the intraparticle diffusion model predicts the boundary diffusion. Langmuir, Freundlich, Temkin, and Dubnin–Radushkevich isotherm models were fitted to explain the fluoride adsorption on MTBC. The Langmuir adsorption capacity of MTBC= 18.78 mg/g was recorded at 298K and decreased as the temperature increased. The MTBC biochar was reused in ten cycles, and the E% was still 85%. The obtained biochar with a large pore size and high removal efficiency may be an effective and low-cost adsorbent for treating fluoride-containing water.