This study evaluated the fracture resistance, biaxial flexural strength (BFS), and dynamic mechanical analysis (DMA) of three-dimensional (3D) printing resins for the esthetic restoration of primary molars. Two 3D printing resins, Graphy (GP) and NextDent (NXT), and a prefabricated zirconia crown, NuSmile (NS), were tested. GP and NXT samples were 3D printed using the workflow recommended by each manufacturer. Data were collected and statistically analyzed. As a result of the fracture resistance test of 0.7-mm-thick 3D printed resin crowns with a thickness similar to that of the NS crown, there was no statistically significant difference among GP (1491.6 ± 394.6 N), NXT (1634.4 ± 289.3 N), and NS (1622.8 ± 323.9 N). The BFS of GP was higher for all thicknesses than that of NXT. Both resins showed high survival probabilities (more than 90%) when subjected to 50 and 150 MPa. Through DMA, the glass transition temperatures of GP and NXT were above 120 °C and the rheological behavior of GP and NXT according to temperature and frequency were analyzed. In conclusion, GP and NXT showed optimum strength to withstand bite forces in children, and 3D printed resin crowns could be an acceptable option for fixed prostheses of primary teeth.
Dental clinics are exposed to various uncomfortable noises. The aim of this study was to quantify the effectiveness of active noise control devices in dental treatment conditions. Two types of commercial headsets (Airpods Pro, QC30) and two types of dental headsets (Alltalk, Quieton Dental) were used for the experiment. Three sounds (high-speed handpiece, low-speed handpiece, and suction system) were measured at three different distances from the dental teeth model, typodont. The distances of 10, 40, and 70 cm reflected the positions of the patient, assistant, and practitioner’s ears, respectively. Sound analysis was performed, and the significance of differences in the maximum noise level using each device was determined with the Kruskal–Wallis test. Dental noise was characterized by the peak in sound pressure level (SPL) at 4–5 kHz and >15 kHz frequencies. The commercial headsets efficiently blocked 1 kHz and 10 kHz of noise. The dental headsets efficiently reduced 4–6 and >15 kHz noise. Quieton had the highest maximum SPL in all situations and positions among the four devices. For a better dental clinic, however, active noise control devices more suitable for the characteristics of dental noise should be developed.
This paper describes the potential oral complications in preterm infants who have undergone orotracheal intubation. Neonatal intubation may have adverse effects on the developing deciduous teeth, oral soft tissues, and even the permanent teeth. However, endotracheal intubation may be essential for the survival of premature infants, owing to incomplete tracheal development. Excessive pressure to the oral tissue must be avoided, in cases where orotracheal intubation is inevitable. Moreover, the potential oral complications must be considered when neonatal intubation is performed for the patient's survival, and subsequent reevaluation and proper oral health care are needed.
This study aimed to investigate the frequency of dental visits after coronavirus disease 2019 (COVID-19) in children and adolescents in comparison to that of adults. The data on the number of dental visits on the basis of different classification and treatment codes for all the age groups were provided by the Health Insurance Review and Assessment Service from January 2017 to December 2020. To reduce the impact of the population change, dental visits per 1000 people was used. After the start of the pandemic, dental visits per 1000 people decreased in all age groups when analyzed for the diseases of pulp and periapical tissues classification code and dental visits per 1000 people decreased over 5 years age groups when analyzed for the pulp treatment code. Regarding the restorative treatment code, visits in the 0 - 19 years age group decreased after the pandemic. Based on the comparison of the number of confirmed COVID-19 cases to that of monthly dental visits by treatment codes, the change rate of pulp and restorative treatments gradually decreased after the waves of the pandemic in February and August 2020 in Korea. Furthermore, dental visits per 1000 people for gingivitis and periodontal disease classification code increased after the pandemic in all age groups. The rate of decrease in dental visits per 1000 people for restorative treatments in children and adolescents was higher than that in adults. The rate of decrease in the number of dental visits for multi-visit pulp treatments showed a rapid decrease as compared to that of 1-visit pulp treatments after the pandemic. This study identified changes in the number of dental visits of children and adolescents after COVID-19 transmission in comparison to that observed in adults.
Ectopic eruption of the permanent molar may absorb the distal root of the primary second molar and may result in a decreased arch length or delayed eruption of the permanent tooth, requiring timely treatment. Therefore, we devised an effective and convenient method to unlock the entrapped tooth using a novel device called a “piston-elastic”. This case report aims to explain the design and clinical application of this piston-elastic and to describe successful cases. Three patients (aged 6, 13, and 16 years) with ectopically erupted maxillary and mandibular molars, respectively, were treated with a piston-elastic. It was bound to the locked molar to improve the eruption path. After a certain time period, the repulsive force pushed the surface of the adjacent tooth, improving the eruption path of the entrapped tooth. The piston-elastic is a novel device that simply and effectively changes the direction of eruption of ectopically entrapped molars. As it can be manufactured and attached to the chair side, impression acquisition on a model cast and laboratory procedures are unnecessary. Compared to existing methods, the piston-elastic can be easily produced and delivered, causes little irritation, and is inexpensive.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.