No abstract

Research about the enhancement of the airlift pump performance by changing the geometry and operational parameters has drawn considerable attention in recent years. This paper presents a comprehensive review of some published research articles on the enhancement performance of the airlift pump and the future direction of the research. In the introductory section, the description, the application, and the performance of the airlift pump are described. The influencing parameters of the airlift pump performance are classified in the geometry and operational. The geometry parameters are including submergence ratio, pipe diameter, pipe length, design, and position of the injector. The operational parameters are including the testing fluid, diameter and density particles, and the superficial velocity of injected air. All of the involved parameters are detail explained in the experimental study section. The detailed derivation of equations of the airlift pump performance and also the modified equation was shown in the theoretical study section. The numerical study of airlift pump operating on two and three phases was also discussed. In the last section, the future directions of the airlift pump are noted, and some conclusions were summarized. It was found that only limited literature about flow patterns in terms of the dynamic interface of each phase and development bubble jet generator airlift pump. Therefore, experimental data are needed to support this effort. Additional work, both theoretical and experimental, needs to be conducted on the effects of type and position bubble jet generators on the flow characteristic and the airlift pump performance, with the hope that the better performance will be obtained.

No abstract

No abstract