No abstract

lt is a known fact that incorporating textures in the contact surfaces can significantly enhance bearing performances. The purpose of this paper is to outline the effects of texture bottom profiles and contour geometries on the performances of hydrodynamic textured journal bearings. The analysis was conducted using computational approach to test eight texture shapes: rectangular, cylindrical, spherical, triangular (TR, Tl, T2, T3) and chevron. The steady state Reynolds equation for modelling the hydrodynamic behaviour of thin viscous film was solved using finite difference technique and mass conservation algorithm (JFO boundary conditions), taking into account the presence of textures on both full film and cavitation regions. The comparison with the benchmark data shows good consistency and an enhancement in bearing performances (load carrying capacity and friction). The results clearly show that the mechanisms of wedge effect and micro-step bearing for the full/partial texturing feature are the main crucial parameters, where the convergent wedge effect present in T2 triangular texture shape can significantly enhance the load-carrying capacity, while the divergent wedge action causes a net load loss. Considering the right arrangement of textures on the contact surface, their surface contours can have a significant impact on the performance of hydrodynamic journal bearings at high eccentricity ratios.

The tribological characteristic of journal bearing systems can be enhanced with the integrating of textures in the contact interfaces, or using the lubricating effect of non-Newtonian fluids. In this study, the combined effects of bearing surface texturing and non-Newtonian lubricants behavior, using micropolar fluid model, on static characteristics of hydrodynamic circular journal bearings of finite length are highlighted. The modified Reynolds equation of micropolar lubrication theory is solved using finite differences scheme and Elrod's mass conservation algorithm, taking into account the presence of the cylindrical texture shape on full and optimum bearing surfaces. The optimization textured area is carried out through particle swarm optimization algorithm, in order to increase the load lifting capacity. Preliminary results are in good agreement with the reference ones, and present an enhancement in the performances of micro-textured journal bearings (load carrying capacity and friction). The results suggest that texturing the bearing convergent zone significantly increases the load carrying capacity and reduce friction coefficient, while fully texturing causes bad performances. It is also shown that the micropolar fluids exhibit better performances for smooth journal bearings than a Newtonian fluid depending on the size of material characteristic length and the coupling number. The combined effects of fully surface textured with micropolar fluids reduce the performance of journal bearing, especially at lower eccentricity ratios. Considering the optimal arrangement of textures on the contact surface, a significant improvement in terms of load capacity and friction can be achieved, particularly at high eccentricity ratios, high material characteristic lengths and high values of the coupling numbers of micropolar fluids.

No abstract

No abstract