East Nusa Tenggara is a region in Indonesia which included in the category of hazard prone to earthquakes, because it is flanked by two earthquakes zones, (subduction zone at the south and back arc trust in the north). It is also vulnerable to earthquake disasters because of high population density. These conditions would threaten the safety of lives and property of the population, so it needs to be research to analyze the level of earthquake hazard and vulnerability in East Nusa Tenggara. For identification of the level of hazard and the vulnerability of the earthquake in this study using two factors: the danger factor with indicator Peak Ground Acceleration, vulnerability factors with indicators of population density districts in East Nusa Tenggara. The calculation of the value of PGA use attenuation function of Fukushima and Tanaka. From the calculation of the data obtained that has a very high earthquake hazard is in Ende and Alor district, while the district has a very high risk of vulnerability is in Sikka, Sumba Barat Daya and Sabu Raijua.
Telah diteliti pengaruh slice thickness (ketebalan irisan) terhadap kualitas citra dengan metode parameter Contrast to Noise Ratio (CNR) menggunakan phantom Toshiba (TOS). Variasi slice thickness yang digunakan yaitu 1, 2, 3, 4, 6, dan 8 mm. Tegangan tabung dan arus waktu sinar-X yang digunakan adalah 80 kV dan 100 mAs, sesuai dengan protokol pemeriksaan kepala pasien. Analisis pengaruh variasi slice thickness terhadap CNR ditentukan dengan uji regresi sederhana menggunakan kurva eksponensial. Hasil uji tersebut menunjukkan variasi slice thickness mempengaruhi nilai CNR, dimana semakin besar slice thickness maka nilai CNR semakin besar dan kualitas citra yang semakin baik.
Research has been carried out to identify the presence of subsurface water in Selulung Village, Kintamani District, Bangli Regency using 2D geoelectric methods. The work process of this research is the first to collect data directly by using a geoelectric device with Wenner configuration. Electric currents are injected from the surface to the subsurface through the current electrodes which are put on the earth's surface. The collected data is then processed using the Res2Din software version 3.71.118. The software results in the form of 2D images are direct lateral images of subsurface structures. From the three trajectories identified, namely at the coordinates 8°12'18.7"S 115°16'08.3"E the lowest resistivity value was 178 Ohm m with a depth of 10 m which was thought to be a rock layer with surface water content. On line 2 at coordinates 8°12'16.1"S 115°16'09.7"E the resistivity value is 6 ohm.m up to 660,000 ohm.m, the maximum depth obtained is 24 m. This line is thought to be a water-bearing layer because the value of resistance is low. Line 3 which is in the coordinates 8°12'16.3"S 115°15'50.0"E the distribution of resistivity values varies from 42 - 9,400 Ohm m.
Telah dilakukan penelitian pemodelan 3D struktur bawah permukaan Gunung Anak Ranakah dan sekitarnya. Penelitian ini bertujuan untuk membuat peta serta menentukan nilai anomali bouguer lengkap, anomali regional, anomali residual, nilai densitas bawah permukaan serta membuat model 3D struktur bawah permukaan. Data yang digunakan merupakan data sekunder yaitu data anomali gravitasi satelit yang diperoleh dari website Topex. Pengolahan data dalam penelitian ini menggunakan metode gravitasi. Pada metode ini akan dilakukan koreksi gravitasi, membuat peta anomali bouguer lengkap, melakukan analisis spektrum, melakukan pemisahan anomali regional dan residual menggunakan filter butterworth serta melakukan inverse modelling dengan menggunakan software ZondGM3D untuk membuat model 3D struktur bawah permukaan. Hasil peta anomali bouguer lengkap menunjukkan nilai anomali daerah penelitian antara 134,6-209,3 mGal, anomali regional 147,4-205,9 mGal dan anomali residual antara (-12,8)-11,0 mGal. Hasil inverse modelling menunjukkan bahwa struktur geologi bawah permukaan Gunung Anak Ranakah dan sekitarnya memiliki rentang densitas antara 1,2-3,0 g/cm3, sehingga dari rentang nilai densitas batuan dapat diperkirakan struktur geologi bawah permukaan Anak Gunung Ranakah dan sekitarnya terdiri dari batuan soil (1,2-2,3 g/cm3 , andesit 2,40-2,80 g/cm3) dan basalt (2,70-3,0 g/cm3).
The measurement of heart rate and body temperature are two of the five Vital Signs that indicate human health. During this time the heart rate is measured using a stethoscope or counting the heart rate through the wrist but this can cause a Human Error. So a tool is designed that can measure heart rate and body temperature using pulse sensor and IR MLX90614 besed on ATmega328 which results can be displayed through the website with patients having their own ID so that the data is not mixed with other patient data and equipped with a database so that it can store patient data. From the results of trials on 3 subjects classified according to the age of 5, 9 and 23 years. The average accuracy of heart rate and body temperature measurements between the design tools and standard equipment is 98.54% for heart rate and 95.97% for body temperature.
This paper attempts to design a system based on the sensors on the market, enabling intelligent automatic control the electronic devices in our homes. For this purpose, the authors created an automation system for room lights and coolers that can be remotely controlled. The system detects human movements with passive infrared receiver (PIR) sensors, measures the room temperature by LM35 sensors, and captures the light intensity of the room by light dependent resistor (LDR) sensors. The data of the three sensors are processed using ATMega2569 microcontroller. The key components of the system were programmed in C language. The measured results of the proposed system were compared with those of standard tools. The comparison shows no significant difference between the two sets of results, with a confidence level of 95 %. Therefore, our system is of great help to those who often forget to turn off electronic devices in their rooms.
In an effort to explore the use of natural resources, stoneware ceramics have been made using iron sand as a filler to replace quartz Kalimantan. The results showed that iron sand can be well used in making stoneware ceramics. This is shown by the measurement of water absorption which is less than 5% and has compressive strength slightly smaller compared to stoneware ceramics made with quartz as a filler.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.