. Formation of the properties of the structure of disperse-filled polymer composites. PNRPU Mechanics Bulletin, 2018, no. 2, pp. 24-31. DOI: 10.15593 В работе исследовано влияние структуры на свойства металлополимерного композита, состоящего из полимерной матрицы в виде эпоксидной смолы (ЭД-20) с бутадиен-стирольным каучуком (БСК), дисперсно-наполненной частицами наномеди. В рамках фрактального анализа рассчитан реальный диаметр агрегатов исходных частиц наполнителя при различных степенях концентрации и размерах частиц наполнения и для разных составов полимерной матрицы. При этом существенно использована концепция структуры полимерного композита как совокупности двух фракталов (мультифракталов), позволяющая определить характер изменения пластично-сти полимерной матрицы и одновременно выявить основные факторы, влияющие на степень возмущения её структуры. С использованием методов фрактального анализа исследовано влияние факторов на величину фрактальной размерности поверхности агрегатов исходных частиц наполнителя и на характер ее зависимости как от степени агрегации, так и от фракталь-ной размерности каркаса агрегата частиц. Предложенный подход позволяет предсказать ко-нечные параметры агрегатов наночастиц как функцию размера исходных частиц, их концен-трации и химических свойств поверхности полимерной матрицы.С использованием скейлингового характера распределения размеров клубков поли-мерных макромолекул показано, что при наполнении полимерных композитов дисперсны-ми микро-и наноразмерными частицами агрегаты этих частиц образуют фрактальный каркас, являющийся аналогом фрактальной решетки. Определенная в рамках кластерной модели степень локального порядка структуры осуществляет контроль важнейших свойств полимерной матрицы и в целом всего композита.При уменьшении размеров частиц полимера и металла происходит существенное из-менение практически всех физических и химических свойств как исходных компонентов, так и полученного композита. Регулирование соотношения между полимерной матрицей и наполнителем с адаптацией условий синтеза к заданным значениям характеристик спо-собствует широкому применению металлополимерных композитов и дает возможность создавать новые технологии конструирования материалов с требуемыми свойствами, включая снижение себестоимости получаемых из них изделий.Использование фрактальных размерностей для характеристики структурных уравнений полимеров позволяет получить ряд количественных аналитических соотношений между ними. © ПНИПУ Ключевые слова:мультифракталы, фрактальный анализ, наполненный полимер, агрегация частиц, нанонаполнитель, металлополимерные композиты, скейлинговое соотношение, фрак-тальный каркас, эпоксидная смола, бутадиен-стирольный каучук, раз-мерность Хаусдорфа, обобщенная размерность Реньи, фрактальная размерность агрегата частиц, фрак-тальная размерность поверхности. Дышин Олег
In recent years, in the oil and gas industry of Azerbaijan, the use of electric submersible pumps (SEP) as one of the effective way to increase the level of production of well products. Currently, electric centrifugal pumping units (ECPU) are widely used both on land and in offshore fields. Currently, a total of about 15 % of SOCAR's oil wells are produced using electric submersible pumping units. ECPU effectiveness is largely determined by both the period of their operation and the frequency of repair and restoration work. It is established that the use of ECPUs contributes to an increase in the service life of equipment and the effectiveness of a mechanized method of oil production. To assess the benefits of the latter, the most important factor is the inter-repair period (Tir) of the equipment. Existing methods for determining the inter-repair period of oilfield equipment are accompanied by large errors, which significantly reduce their reliability. In this regard, the article is tasked with developing a more practical and reliable method for determining the inter-repair period, where the point of change in the nature of the failure rate is adopted as the determining parameter.
An increase in electricity generation is possible not only through the construction of power plants, but also through the creation of fundamentally new energy sources. One of the problems of modern electrical engineering is to ensure the reliability of the operation of capacitors at electric field strengths exceeding I50-200MV. In the domestic and foreign capacitor industry, for heavy pulse modes, castor oil (CO) is used as a liquid impregnation. The development of a method for producing a substitute for natural castor oil, which is a universal impregnating liquid in capacitors, is an urgent problem in the electrical industry. Thus, we have developed a method for the production of acetoxymethyl-w.hexyl-o-xylene, the electrophysical properties of which make it possible to use it as an environmentally friendly and promising substitute for natural castor oil. However, there was a problem of stabilization, since compounds of the ester type have (as impregnating liquids in capacitors) a disadvantage, which consists in their sensitivity to light hydrolysis and atmospheric effects. Ester exhibits high stability with respect to air up to 200 °С, therefore, inhibition by the addition of antioxidants is required is not new. In this work developed the basic electrophysical properties of the ester-acetoxymethyl-secondary hexyl-o-xyleole; methods for its purification and stabilization. There were chosen the adsorption method of thermo-oxidative stabilization to clean dielectric fluid from conductive impurities. As a result of the electrophysical characteristics of the acetoxymethyl-secondary hexyl-o-xyleole ester, as well as the method of its purification using alumina, and hydrogenation on a catalyst representing 0.2 % palladium on alumina and stabilization using additives NG-2246. As a result of the research, it was possible to obtain an ester with improved electrophysical parameters
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.