Günümüz ağaç malzemenin yapısal veya yarı yapısal alanlarda en ekonomik bir şekilde kullanılması kaçınılmaz bir zorunluluk haline gelmiştir. Ağaç malzemenin; yapısal veya yapısal olmayan amaçlarda kullanılması; çeşitli deney yöntemleriyle mekanik ve fiziksel özelliklerinin araştırılarak ortaya konulması ile orantılıdır. Bu çalışmada, Ihlamur (Tilia tomentosa) odununun, bazı önemli mekanik ve fiziksel özelliklerinin araştırılması amaçlanmıştır. Bu amaçla Ihlamur odununun; radyal, teğet ve boyuna yönde statik sertlik değeri, çivi ve vida tutma kapasitesi, eğilmede elastikiyet modülü, eğilme direnci ile hava kurusu yoğunluk değeri belirlenmiştir. Deney sonuçlarına göre; Vida tutma kapasitesi boyuna, radyal ve teğet yönlerde sırasıyla 13.47, 20.32 ve 24.60, N/mm2 olarak belirlenmiştir. Çivi tutma kapasitesi; boyuna, radyal ve teğet yönlerde sırasıyla 5, 7,01 ve 7,09, N/mm2 olarak ve Sertlik direnci (Janka); boyuna radyal ve teğet yönlerde sırasıyla, 50,13, 27,30 ve 33,03N/mm2, eğilmede elastikiyet modülü 8572.87 N/mm2, eğilme direnci 83.26 N/mm2 ve hava kurusu yoğunluk değeri ise 489.46 kg/m3olarak belirlenmiştir. Deney numunelerinden elde edilen veriler bazı endüstriyel ve endüstriyel olmayan odun türleri ile karşılaştırılarak bu odun türü hakkında bilgi verilmiştir.
Parallel-strand lumber was manufactured with bamboo (Phyllostachys bambusodies). A polyol compound was added to modify the adhesive (pMDI). Bamboo culms were used to manufacture strands 3 mm thick, 19 mm wide, and 65 cm long. Adhesive was applied to the strands at 200 g/m2 with pressing at 110 °C, 15 kg/cm2, and 30 min. Panels were made with width 600 mm, length 600 mm, and thickness 20 mm. Some physical properties (oven-dry density, air-dry density, moisture content, thickness swelling, and water absorption percentage) and mechanical properties (bending resistance, modulus of elasticity, impact resistance, screw-holding capacity in tangential, radial, and transverse directions) of parallel-strand lumber for both adhesive types were determined. Both resin types improved some physical and mechanical properties of parallel-strand lumber. Additionally, the modulus of rupture and flexural modulus of elasticity of the test specimens using pMDI+5%MP adhesive were higher than those of the test specimens using pMDI. The average screw-holding capacity values of the test specimens were affected by the fiber aspect of the specimens rather than the adhesive type. Parallel-strand lumber produced from both pMDI and pMDI+5%MP adhesives can be used in structural applications, especially in places exposed to the disturbing effects of weather.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.