Abstract. There are several parameters that must be set before manufacturing a product using 3D printing. These parameters include the orientation deposition of that product, type of material, form fill, fill density, and other parameters. The finished product of 3D printing has some responses that can be observed, measured, and tested. Some of those responses are the processing time, the dimensions of the end product, its surface roughness and the mechanical properties, i.e. its yield strength, ultimate tensile strength, and impact resistance. This research was conducted to study the relationship between process parameters of 3D printing machine using a technology of fused deposition modeling (FDM) and the generated responses. The material used was ABS plastic that was commonly used in the industry. Understanding the relationship between the parameters and the responses thus the resulting product can be manufactured to meet the user needs. Three different orientations in depositing the ABS polymer named XY( first orientation), YX (second orientation), and ZX (third orientation) were studied. Processing time, dimensional accuracy, and the product strength were the responses that were measured and tested. The study reports that the printing process with third orientation was the fastest printing process with the processing time 2432 seconds followed by orientation 1 and 2 with a processing time of 2688 and 2780 seconds respectively. Dimension accuracy was also measured from the width and the length of gauge area of tensile test specimens printed in comparison with the dimensions required by ASTM 638-02. It was found that the smallest difference was in thickness dimension, i.e. 0.1 mm thicker in printed sample using second orientation than as required by the standard. The smallest thickness deviation from the standard was measured in width dimension of a sample printed using first orientation (0.13 mm). As with the length dimension, the closest dimension to the standard was resulted from the third orientation product, i.e 0.2 mm. Tensile test done on all the specimens produced with those three orientations shows that the highest tensile strength was obtained in sample from second orientation deposition, i.e. 7.66 MPa followed by the first and third orientations products, i.e. 6.8 MPa and 3.31 MPa, respectively.
Produsen telur umumnya masih melakukan kegiatan penyortiran telur berdasarkan bobotnya secara tradisional. Proses pemisahan ini mengakibatkan kesalahan jumlahnya dalam proses pemisahan telur selain itu juga membutuhkan waktu yang lebih lama. Selain itu, proses ini memiliki permasalahan lainnya dimana ayam petelur menjadi stres karena keberadaan peternak di lokasi yang dapat menurunkan kualitas hingga kuantitas produk telur yang dihasilkan ayam petelur. Berdasarkan permasalahan tersebut maka dimanfaatkanlah dua mekanisme conveyor. Conveyor pertama adalah roller conveyor digunakan untuk mengangkut telur dari kandang ke lokasi lainnya yang sudah ditentukan sekaligus berfungsi sebagai pengumpan telur yang masuk dan keluar sekaligus memindahkannya secara otomatis ke prototipe mesin sortasi. Mesin terdiri dari microcontroller yang berfungsi sebagai pusat kendali timbangan dan mekanisme separator. Telur yang keluar dari conveyor kedua adalah belt conveyor dimana telur masuk ke timbangan, dan diberhentikan oleh servo stopper. Setelah selesai ditimbang, servo stopper membuka gate dan telur diarahkan ke sekat pemisah yang terhubung dengan sensor berat kemudian membuka sekat yang akan membuat telur akan masuk pada jalur yang telah ditentukan sesuai dengan bobotnya melalui servo selector. Berdasarkan hasil pengujian prototipe yang telah dilakukan mekanisme ini memerlukan waktu berkisar 10-11 detik untuk mengumpulkan dan memisahkan telur melalui tiga jalur kategorial yang telah ditetapkan sebagaimana pada perencanaan awal.
Kelurahan Nginden Jangkungan merupakan salah satu bagian dari Kelurahan di Wilayah Kecamatan Sukolilo Kota Surabaya yang berada pada provinsi Jawa Timur dimana Kelurahan ini terkenal dengan sebutan Kampung Herbal. Di Kampung Herbal ini, penduduk setempat memanfaatkan tanah aset pemerintah kota yang dulu merupakan rawa dengan membudidayakan tanaman herbal. Permasalahan yang ditemukan adalah banyaknya sampah penduduk dan ranting kayu dan dedaunan di lingkungan sekitar yang belum termanfaatkan secara menyeluruh dengan optimal yang dapat menyebabkan lingkungan sekitar menjadi tercemar berupa bau yang tidak sedap, banjir, dan bahkan mendatangkan berbagai penyakit. Selain itu, kebutuhan akan pupuk organik untuk budidaya tanaman yang berada di kampung herbal membutuhkan biaya operasional yang tidak sedikit untuk pemenuhan kecukupan nutrisi tanaman yang ada di Kampung Herbal tersebut. Solusi permasalahan yang dapat dilakukan untuk mengatasi hal tersebut adalah perlunya pengadaan mesin kompos organik untuk mengendalikan sampah supaya tidak tercemar dan perlunya pengadaan pupuk organik sendiri mendukung budidaya tanaman yang digunakan untuk proses pembimbitan dan pemenuhan nutrisi bagi tanamanan herbal tersebut dengan biaya yang murah dan terjangkau termasuk menciptakan Ruang Terbuka Hijau (RTH). Adapun metode pelaksanaan dilakukan dengan beberapa tahapan antara lain melakukan diskusi dan tanya jawab, melakukan peninjauan lapangan, melakukan sosialisasi dan pendampingan cara pembuatan pupuk kompos organik, melakukan proses perajangan, serta melakukan proses komposting secara kimiawi. Pada akhir tahapan ditunjukkan kinerja optimal mesin kompos yang telah berhasil melakukan proses perajangan mandiri secara sempurna dalam ukuran paling kecil berkisar 63% dari target awalnya 60% sebagai bahan dasar untuk proses komposting guna menghasilkan pupuk kompos organik yang berkualitas.
The function of clutch disc is to transmit the power from the engine to the transmission. There are a lot of vehicle that equipped with different size of engine capacity. Therefore, it is required to use a clutch disc with the appropriate capability to transmit the power from the engine. Note that there is a clutch disc modification type that combine the Japanese and European design called clutch disc Hino MB. This type clutch disc is used for Hino FM 260Ti. By using the combination design, the clutch disc will have longer lifetime and lower risk to crack. There is a crack problem that happened from the usage of clutch disc Hino MB. Therefore, it is necessary to do a research to optimize the design of clutch disc Hino MB. This research is done by making several new designs of clutch disc Hino MB and tests it through simulation of stress analysis. The parameter that had been analysed is the value of von mises stress from each design. The length of grooves is also analysed to get a better design result. This research produces a new design of clutch disc Hino MB that has better design structure. The best result of the simulation that has been done to the clutch disc with interval 5 mm reduction is owned by clutch disc with 35 mm groove’s length reduction and the value is 121.1 MPa.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.