Поверхностная обработка с прикатыванием почвы является важнейшей технологической операцией, оказывающей непосредственное влияние на условия роста и развития корневой системы растений, и, в конечном итоге, на урожайность возделываемых полевых культур. Для повышения эффективности этого процесса при разработке новых форм и обосновании параметров и режимов работы почвообрабатывающих устройств следует использовать механико-бионический подход, хорошо зарекомендовавший себя при разработке конструктивных схем и обосновании параметров различных сельскохозяйственных машин. Конечным результатом является адаптация рабочего органа, приведение его к подобию живого организма и придания ему определённых геометрических форм, динамики движения и свойств живого прототипа. При этом используются методы общей теории систем, земледельческой механики, механики сплошной среды, интегрального и дифференциального исчисления. Исходными данными для обоснования параметров являются физико-механические свойства почвы: деформационный показатель почвы, модуль сдвига, коэффициент бокового расширения, коэффициент трения. В статье обоснована оптимальная форма рабочей поверхности рыхлительных элементов кольчато-режущего катка. Получены теоретические зависимости по обоснованию основных конструктивных параметров катка. Для почвенных условий Республики Крым их рациональные значения равны: шаг расстановки рыхлительных элементов S = 160 мм, ширина контакта рыхлительного элемента катка с почвой b = 45…50 мм, количество рыхлительных элементов Z = 12 шт., диаметр рыхлительного элемента катка D р.э. = 48…54 мм, высота рыхлительного элемента катка h = 42…46 мм. Рассмотрена кинематика процесса взаимодействия рыхлительных элементов с почвой и получена зависимость для определения полного тягового сопротивления почвообрабатывающего кольчато-режущего катка.
The article presents the methods and results of bionic modeling in agricultural mechanics, which made it possible to justify models of working bodies adapted to the soil environment: a tillage ring-cutting roller using modeling of a digging foot of the rhinoceros beetle; a spring soil leveler, where the burrowing limbs of the mole cricket (Gryllotalpa) are used; a stubble cultivator, in the likeness of the forms of a burrowing limb of the scarab beetle (Scarabaeus). The analysis of the results of the tests shows that all the models of working bodies of machines for surface tillage, created by the method of bionic modeling, show a significant decrease in traction resistance in comparison with serial working bodies.
In the southern regions of Russia, the technology of cultivation of grain crops in the variant of partial sowing has been widely used. In this regard, it became necessary to create effective working bodies of a stubble cultivator that would have fundamentally new resource-saving ways of influencing the area under cultivating and meet the requirements of modern advanced technologies. The shapes of the working bodies surfaces of the cultivators were improved taking into account the mechanic-bionic approach. The main parameters of the toothed cutting surface were determined by the method of bionic comparisons, with a scarab beetle as a bionic prototype. Use of the serrated shape of the cutting edge is consistent with the bionic principle of multi-contact exposure and leads to the fact that the tops of the teeth become stress concentrators and, with a significantly smaller indentation force, cause soil destruction processes, which reduces the energy costs of cutting the soil layer. The optimal curvilinear shape of the working surface made in the form of a logarithmic spiral, is characterized by a constant value of the angle between the normal and the radius vector, and the value of this angle, equal to the angle of internal friction of the soil φ2, will ensure the sliding of the soil and plant residues with minimal energy consumption. The number (n = 4), height (h = 5...7 mm) and tooth placement step (S = 10...12 mm) of the bit tip of the stubble cultivator are analytically justified. The shape of the profile of the working surface of the stubble cultivator bit in the form of a logarithmic spiral with a variable angle of crumbling is proposed. The studies were conducted in the period from September to October 2018 in the soil channel of the research Laboratory of Bionic Agroengineering of the Department of Mechanization and Technical Service in Agro-Industrial Complex. They have shown the decrease in the traction resistance of the proposed working body of the stubble cultivator by 16.5% in comparison with the traction resistance of the serial sample.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.