The principle of the equivalence of gravitational and inertial mass is one of the cornerstones of general relativity. Considerable efforts have been made and are still being made to verify its validity. A quantum-mechanical formulation of gravity allows for non-Newtonian contributions to the force which might lead to a difference in the gravitational force on matter and antimatter. While it is widely expected that the gravitational interaction of matter and of antimatter should be identical, this assertion has never been tested experimentally. With the production of large amounts of cold antihydrogen at the CERN Antiproton Decelerator, such a test with neutral antimatter atoms has now become feasible. For this purpose, we have proposed to set up the AEGIS experiment at 0168-583X/$ -see front matter Ó 2007 Published by Elsevier B.V.

Un-prepoled Lead Zirconate Titanate Lanthanum doped-PLZT ferroelectric cathodes have emitted intense current pulses under the action of a high voltage pulse of typically 8 kV/cm for PLZT of 8/65/35 composition and 25 kV/cm for PLZT of 4/95/5 composition. In the experiments described in this paper, the exciting electric field applied to the sample is directed from the rear surface towards the emitting surface. The resulting emission is due to an initial field emission from the metal of the grid deposited over the emitting surface with the consequent plasma formation and the switching of ferroelectric domains. These electrons may be emitted directly from the crystal or from the plasma. This emission requires the material in ferroelectric phase. In fact, PLZT cathodes of the 8/65/35 type, that is with high Titanium content, showing ferroelectric-paraelectric phase sequence, emit at room temperature, while PLZT cathodes of the 4/95/5 type, that is with low Titanium content, having antiferro-ferro-paraelectric phase sequence, emit strongly at a temperature higher than 130°C.

Antihydrogen production by charge exchange reaction between Positronium (Ps) atoms and antiprotons requires an efficient excitation of Ps atoms up to high-n levels (Rydberg levels). In this study it is assumed that a Ps cloud is produced within a relatively strong uniform magnetic field (1 Tesla) and with a relatively high temperature (100 K). Consequently, the structure of energy levels are deeply modified by Zeeman and motional Stark effects. A two-step laser light excitation, the first one from ground to n = 3 and the second from this level to a Rydberg level, is proposed and the physics of the problem is discussed. We derive a simple formula giving the absorption probability with substantially incoherent laser pulses. A 30% population deposition in high-n states can be reached with feasible lasers suitably tailored in power and spectral bandwidth.

Spontaneous electrical polarization of ferroelectric materials can be changed either by reversal or by phase transition from a ferroelectric into a non-polar state or vice versa. If spontaneous polarization changes are induced at a submicrosecond time-scale, strong uncompensated surface charge densities and related fields are generated, which may lead to the intense self-emission of electrons from the negatively-charged free surface areas of the ferroelectric cathode. The nature of this self-emission differs essentially from other methods of ferroelectric electron emission and from conventional electron emission in that the latter methods are only achieved by extracting electrons with externally applied electric fields. When electron guns are constructed with ferroelectric cathodes, new design criteria have to be taken into account. The intensity, the energy, the temporal and spatial distribution and the repetition rate of the emitted electron beams can be adjusted within wide limits. The advantages of ferroelectric cathodes and the technological difficulties arising during their production, preparation, and operation are identified and discussed and solutions to the problems are proposed. Experiences with a few applications of ferroelectric electron emission are reported and suggestions for further applications are made.

A radiofrequency electron gun joined to a compressor can generate trains of THz subpicosecond electron pulses by illuminating the photocathode with trains of laser pulses. Assuming a prompt electron emission, each laser pulse generates an electron disk at the cathode. The disk train evolves toward a slightly modulated slug having a peculiar sawtooth energy modulation. This kind of energy modulation is transformed into a density modulation within a velocity bunching compressor recovering at a good extent the initial multi-disk profile. The electron beam evolution is analyzed through simulations looking at its features as function of pulse and frequency characteristics of the laser and of the accelerator parameters.