A system that makes the injection of fertilizers in the irrigation water is the one that uses injection pump. This requires adjustment, which can be done depending on the manufacturer's information or a calibration made by the user under real operating conditions, the latter being the most recommended, due to the uneven manufacturing of the equipment.This work aimed to evaluate the hydraulic performance of the Tefen chemical injection pump at different pressures of the system (300, 240, 160 and 60 kPa) and different solutions to be injected (only water, water with fertilizer conventional and water with highly soluble fertilizer).It was concluded that the equipment presents uniformity of work in the situations tested, which maintains an injection pattern independent of the injected solution and that there is linear correlation with high values of coefficient of determination (R²) between the variables of system pressure and injection flow in all the solutions and all the adjustment points evaluated in the injector. Thus it is possible to calculate the injection flow rate of the equipment through the defined equations, for different situations tested.KEY WORDS: calibration; fertigation; injection Tefen. DESEMPENHO DE UM DOSIFICADOR HIDRÁULICO PARA FERTIRRIGAÇÃORESUMO: Um sistema que faz a injeção de fertilizantes na água de irrigação é o que utiliza bomba injetora. Esta necessita de regulagem, que pode ser feita em função da informação do fabricante ou de uma calibração feita pelo usuário em condições reais de funcionamento, sendo essa última a mais recomendada, devido à desuniformidade de fabricação dos equipamentos.Esse trabalho teve como objetivo avaliar o desempenho hidráulico da bomba injetora de produtos químicos da marca Tefen, em diferentes pressões do sistema (300, 240, 160 and 60
Considering the influence on performance of PRV's water application uniformity of center pivot irrigation systems, this study had the aim to compare, under simulated conditions of two distinct wear PRV's (new PRV and PRV with more than 8000h of use) the values of water application uniformity, optimum water application depth and optimum productivity of bean (Phaseolus vulgaris). Results showed that worn PRV causes a 5.1% reduction on center pivot water application uniformity coefficient value. After correcting the water-yield function of the bean crop for the values of water application uniformity provided by new and used PRV, it was observed changes on the values of total seasonal irrigation depth that maximizes bean yield (350 mm for new PRV and 346 mm for used PRV), and changes also on the maximum bean yield (2815 kg / ha for new PRV and 2611 kg / ha for used PRV).Considering only the variable energy costs for pumping the irrigation water, the wear of the PRV causes a R$ 485 / ha reduction on contribution margin. KEYWORD: center pivot, irrigation, uniformity. EFEITO DO DESGASTE DAS VÁLVULAS REGULADORAS DE PRESSÃO DE UMPIVÔCENTRAL NA SUA UNIFORMIDADE DE APLICAÇÃO DE ÁGUA E NA LÂMINA ÓTIMADE IRRIGAÇÃO DO FEIJOEIRO RESUMO: Considerando a influência exercida pelas VRP na uniformidade de aplicação de água de um pivô central, este trabalho teve como objetivo comparar valores simulados para duas condições distintas de desgaste das VRP's (VRP novas e VRP com mais de 8000h de uso) de uniformidade de aplicação de água, lâmina ótima de aplicação de água e produtividade ótima 1 Master degree student at ESALQ/USP.Piracicaba-SP. Caixa Postal 9 13418-900.Email: satiroagro@usp.br 2 Professor at UFLA -Lavras -MG. E-mail: acolombo@deg.ufla.br 3 PhD degree student at UFLA. victor.buono1@gmail.com 4 Master degree student at ESALQ/USP.Piracicaba-SP 5 Professor at UFLA -Lavras -MG. E-mail: Adriano.diotto@deg.ufla.br A.C. S. de Araújo et al. do feijão (Phaseolus vulgaris).Os resultados indicam que para as duas condições estudadas houve uma redução de 5,1% no coeficiente de uniformidade de aplicação. Após a correção da função de produção do feijoeiro pelos coeficientes de uniformidade com VRP novas e com mais de 8000h de uso, foram observadas diferenças nos valores da lâmina que maximiza a produção da cultura (350 mm para VRP novas e 345mm para VRP usadas), e nas produtividades máximas correspondentes (2815 kg/ha para VRP nova e 2611 kg/ha para a VRP usada). Considerando somente o custo do bombeamento de água, o desgaste das VRP causa uma redução na margem de contribuição de R$485/ha PALAVRAS CHAVE: pivô central, irrigação, uniformidade.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.