Boiling is a common mechanism for liquid−vapor phase transition and is widely exploited in power generation and refrigeration devices and systems. The efficacy of boiling heat transfer is characterized by two parameters: (a) heat transfer coefficient (HTC) or the thermal conductance; (b) the critical heat flux (CHF) limit that demarcates the transition from high HTC to very low HTC. While increasing the CHF and the HTC has significant impact on system-level energy efficiency, safety, and cost, their values for water and other heat transfer fluids have essentially remained unchanged for many decades. Here we report that the high surface tension forces offered by liquids in nanowire arrays made of Si and Cu can be exploited to increase both the CHF and the HTC by more than 100%.

Camouflage is an emerging application of metamaterials owing to their exotic electromagnetic radiative properties. Based on the use of a selective emitter and an absorber as the metamaterials, most reported articles have suggested the use of single‐band camouflage, however, multispectral camouflage is a challenging issue owing to a difference of several orders of magnitude in the unit cell structure. Herein, hierarchical metamaterials (HMMs) for multispectral signal control when dissipating the absorbed energy of microwaves through the selective emission of infrared (IR) waves from the unit cell structure of the HMM are demonstrated. Integrating an IR selective emitter (IRE) with a microwave selective absorber, multispectral signal control with the large‐sized unit cell structures of up to 10 cm are realized. With an IRE, the emissive power from the HMM toward 5–8 µm is 1570% higher than the Au surface, which is preventing the occurrence of thermal instability. Furthermore, we determine that the signature levels of targeted IR waves (8–12 µm) and microwaves (2.5–3.8 cm) are reduced by up to 95% and 99%, respectively, when applying the HMM.

Morphologically driven dynamic wickability is essential for determining the hydrodynamic status of solid-liquid interface. We demonstrate that the dynamic wicking can play an integral role in supplying and propagating liquid through the interface, and govern the critical heat flux (CHF) against surface dry-out during boiling heat transfer. For the quantitative control of wicking, we manipulate the characteristic lengths of hexagonally arranged nanopillars within sub-micron range through nanosphere lithography combined with top-down metal-assisted chemical etching. Strong hemi-wicking over the manipulated interface (i.e., wicking coefficients) of 1.28 mm/s0.5 leads to 164% improvement of CHF compared to no wicking. As a theoretical guideline, our wickability-CHF model can make a perfect agreement with improved CHF, which cannot be predicted by the classic models pertaining to just wettability and roughness effects, independently.

Camouflage is a method evading predators in nature by assimilating into the environment. To realize an artificial camouflage surface for displays and sensors, many researchers have introduced several concepts including a metamaterial-selective absorber/emitter (MSAE). When an MSAE is adopted for camouflage at infrared (IR) wave, the energy dissipation of reduced emitting energy, as well as the reduction of emitting energy to deceive the IR signature from the surface, must be considered from the viewpoint of energy balance due to thermal instability. The integrated investigation of radiative heat-transfer characteristics and IR signature control of MSAE remains, however, poorly understood. Here, we investigate MSAE for IR camouflage by considering the energy balance in terms of reduction of emitting energy and dissipation of reduced emitting energy. On the basis of the atmospheric transmittance at an IR band, we designate the detected band as having wavelengths of 3–5 and 8–14 μm and the undetected band as having a wavelength of 5–8 μm. We investigate, via experiments and simulations, the optical characteristics required for IR camouflage and extract the factor that controls the emissive power. Furthermore, we suggest an integrated factor for evaluating the camouflage performance based on the concept of energy balance and propose a design guideline for MSAE with the aim of maximizing the camouflage performance at the IR band. This study will help to expand the range of applications (such as energy harvester and sensors) and others that are based on selective absorption/emission.

In article number https://doi.org/10.1002/adfm.201807319, Hyung Hee Cho and co‐workers successfully demonstrate a hierarchical metamaterial (HMM) for multi‐spectral control. The intermediate dielectric layer enables the integration of the microwave absorber and infrared selective emitter. The HMM shows not only the signature control against the microwave and infrared spectra, but also the dissipation of the reduced emitting energy through the undetected band of infrared waves.