A flexible, transparent acoustic actuator and nanogenerator based on graphene/P(VDF-TrFE)/graphene multilayer film is demonstrated. P(VDF-TrFE) is used as an effective doping layer for graphene and contributes significantly to decreasing the sheet resistance of graphene to 188 ohm/sq. The potentiality of graphene/P(VDF-TrFE)/graphene multilayer film is realized in fabricating transparent, flexible acoustic devices and nanogenerators to represent its functionality. The acoustic actuator shows good performance and sensitivity over a broad range of frequency. The output voltage and the current density of the nanogenerator are estimated to be ∼3 V and ∼0.37 μAcm(-2), respectively, upon the application of pressure. These values are comparable to those reported earlier for ZnO- and PZT-based nanogenerators. Finally, the possibility of rollable devices based on graphene/P(VDF-TrFE)/graphene structure is also demonstrated under a dynamic mechanical loading condition.

A novel graphene-on-organic film fabrication method that is compatible with a batch microfabrication process was developed and used for electromechanically driven microactuators. A very thin layer of graphene sheets was monolithically integrated and the unique material characteristics of graphene including negative thermal expansion and high electrical conductivity were exploited to produce a bimorph actuation. A large displacement with rapid response was observed while maintaining the low power consumption. This enabled the successful demonstration of transparent graphene-based organic microactuators.

No abstract

No abstract