Thermal reactors have been considered as interim solution for transmutation of minor actinides recycled from spent nuclear fuel. Various studies have been performed in recent decades to realize this possibility. This paper presents the neutronic feasibility study on transmutation of minor actinides as burnable poison in the VVER-1000 LEU (low enriched uranium) fuel assembly. The VVER-1000 LEU fuel assembly was modeled using the SRAC code system, and the SRAC calculation model was verified against the MCNP6 calculations and the available published benchmark data. Two models of minor actinide loading in the LEU fuel assembly have been investigated: homogeneous mixing in the UGD (Uranium-Gadolinium) pins and coating a thin layer to the UGD pins. The consequent negative reactivity insertion by minor actinides was compensated by reducing the gadolinium content and boron concentration. The reactivity of the LEU assembly versus burnup and the transmutation of minor actinide nuclides were examined in comparison with the reference case. The results demonstrate that transmutation of minor actinides as burnable poison in the VVER-1000 reactor is feasible as minor actinides could partially replace the functions of gadolinium and boric acid for excess reactivity control.
This paper investigates the problem of output feedback attitude control for rigid spacecraft subject to inertia matrix uncertainty, space disturbance, and input saturation. Firstly, a model transformation is adopted to convert an attitude system with immeasurable angular velocity into a new system. All states of the new converted system are measurable and available for feedback; however, the system contains mismatched uncertainty resulting from the coordinate transformation. Then, an adaptive nonsingular back-stepping control with practical predefined-time convergence is designed. To resolve the problem of input saturation, an anti-windup compensator is developed. It is analytically proved that the spacecraft attitude and angular velocity are practical predefined-time stable, such that the convergence time is a given tunable constant. The simulation results reveal that the proposed control framework provides rapid attitude maneuver and actuator saturation elimination.
The sliding mode control is well-known as a useful control technique that can be applied in several real-world applications. However, a straightforward and efficient process of selecting the sliding mode control gains remains a challenging but interesting topic. This paper investigates a novel gain tuning method for the sliding mode control of second-order mechanical systems. Firstly, we obtain relations between the gains and the natural and damping ratio of the closed-loop system. Secondly, the time constant of the system’s actuators and the system response performance criteria, including settling time and delay time, are taken into consideration to determine appropriate ranges of the gains. These gain ranges allow control designers to select the controller gains in a time-saving manner and ensure that the desired system performance is met and the actuators work properly. Finally, the proposed method is applied to the gain tuning process of a sliding mode altitude controller for an actual quadcopter unmanned aerial vehicle. Simulation and experimental results demonstrate the applicability and effectiveness of this method.
This paper presents the results of neutronic calculations using the deterministic and Monte-Carlo methods (the SRAC and MCNP5codes) for the VVER MOX Core Computational Benchmark Specification and the VVER-1000/V392 reactor core. The power distribution and keff value have been calculated for a benchmark problem of VVER core. The results show a good agreement between the SRAC and MCNP5 calculations. Then, neutronic characteristics of VVER-1000/V392 such as power distribution, infinite multiplication factor (k-inf) of the fuel assemblies, effective multiplication factor keff, peaking factor and Doppler coefficient were calculated using the two codes.
The paper aims to develop an MCNP5-ORIGEN2 coupling scheme for burnup calculation. Specifically, the Monte Carlo neutron transport code (MCNP5) and the nuclides depletion and decay calculation code (ORIGEN2) are combined by data processing and linking files written in the PERL programming language. The validity and applicability of the developed coupling scheme are tested through predicting the neutronic and isotopic behavior of the “VVER-1000 LEU Assembly Computational Benchmark”. The MCNP5-ORIGEN2 coupling results showed a good agreement with the k-inf benchmark values within 600 pcm during the entire burnup history. In addition, the differences of isotopes concentration at the end of the burnup (40 MWd/kgHM) when compared with benchmark values were reasonable and generally within 6.5%. The developed coupling scheme also considered the shielding effect due to gadolinium isotopes and simulated well the depletion of isotopes as a function of the radial position in gadolinium bearing fuel rods.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.