Son yıllarda birçok sebebe bağlı olarak büyük şehirlere olan göçler oldukça yüksek seviyelere ulaşmıştır. Nüfustaki bu artış, istihdam, barınma ve iş sahası açısından yüksek katlı yapı yapma ihtiyacını doğurmuştur. Bu ihtiyaç karşısında gelişen teknolojiyle birlikte yüksek katlı binaların önemi artmıştır.
Günümüzde yüksek katlı yapılara olan ihtiyaç ve artan ilgi, taşıyıcı sistemlerde perdenin önemini arttırmıştır. Perdeli sistemler, yapı taşıyıcı sisteminde tek başlarına kullanılabildikleri gibi, çerçevelerle birlikte de kullanılabilmektedir. Perde çerçeve karşılıklı etkileşimiyle yapıya kazandırılan dayanım ve süneklikten dolayı daha çok tercih edilmektedir.
Bu çalışmada konut amaçlı kullanılacak 5 katlı ve 11 katlı iki farklı yapı için, perde yerleşim düzenleri değiştirilerek hazırlanan yapı modellerinde oluşan yapısal davranışlar incelenmiştir. Beton kalitesi, kat alanı ve zemin sınıfı sabit tutulan yapılarda, çerçeveli sistem, referans sistem olarak kabul edilmiştir. Referans plan üzerine, eşit miktarda ve aynı ebatlarda perdeler eklenmiştir. Perde en kesit alanı sabit tutulup, referans plan üzerinde perde yerleşim düzenleri değiştirilerek 6 farklı sistem türü oluşturulmuştur.
Yapılan çözümleme sonucunda sistemlerin göreli kat ötelemeleri, kat deplasmanları, yapı periyotları, tabanda meydana gelen kesme kuvveti, perde kesme kuvvetinin toplam taban kesme kuvvetine oranı, A1 burulma düzensizliği, B1 zayıf kat düzensizliği ve B2 yumuşak kat düzensizliği sonuçları incelenmiştir. Sonuçlar birbirleriyle karşılaştırılarak taşıyıcı sistemlerin farklılıklarının yapı davranışını ne oranda etkilediği araştırılmıştır.
Bu çalışmada, betonarme yapılarda, taşıyıcı sistem değişikliklerinin deprem etkisi altında, plastik mafsal teorisine göre yük arttırımı yöntemiyle itme (pushover) analizleri yapılarak söz konusu yapıların davranışları incelenmiştir. Deprem aktivitesi yüksek olan bölgelerdeki betonarme yapıların itme (pushover) analizleri yapılarak yük-deplasman eğrileri elde edilmiş, deprem etkisi altındaki süneklik, rijitlik katsayıları ile yapıların davranışları hakkında belirli saptamalar yapılmıştır. Taşıyıcı sistemdeki kolon ve kirişlerin yanında perdelerin de kullanılmasıyla oluşan yapı titreşim periyotları ve yapı davranışları araştırılmış, yatay yüklerin artışı altında yatay deplasmanların değişimleri incelenmiştir. Yapılan değerlendirmeler ile betonarme yapılar tasarlanırken dikkat edilmesi gereken parametrelerle ilgili tavsiyeler verilmiştir. İncelenen model yapıların her biri için itme analizleri ayrı ayrı yapılmış, hesap adımları belirlenmiştir. Sonrasında çıkan sonuçlara göre deprem etkileri altında söz konusu modellerin süneklikleri, rijitlikleri, deprem davranışları, taban kesme kuvvetleri gibi değerleri ele alınmış ve tartışılmıştır. Sonuç kısmında ise, betonarme yapıların taşıyıcı sistemlerinde perdelerin bulunmasının yapıların deprem davranışlarına etkileri ortaya konarak, yapıların süneklik katsayıları ve deprem yükü azaltma katsayıları gibi parametreler saptanmış ve bunlar tartışılarak sistemlerin dezavantajlı ve avantajlı yanları ortaya konmuştur.
Due to various architectural and structural requirements, irregularities in the structures are inevitable. In order to determine the behavior of the structure under the effect of the earthquake and to find the relevant cross-sectional effects, the regular or irregularity of the structure of the structure of the structure is significantly effective. Irregularities present in the design cause further strain of the carrier elements. With the increase in the number of floors in earthquake risk regions, curtains are needed in order to ensure sufficient rigidity and strength in the frame systems and to limit the floor displacements. When the shear walls are used together with the frame system in a conveyor system, their stiffness is larger than the columns and they meet a significant part of their horizontal loads such as earthquake and wind. In this study, the effect of shear walls placement on structural behavior in reinforced concrete buildings with H-type irregularity was investigated. For this purpose, 7 models, each of which are 4,8,12 stories and one of which are reference models, have been examined on the irregularity and behavior of the structure in different shear walls settlements. The results obtained by using the İDECAD V7 program and DBYBHY-2007 principles ware analyzed by using 2018 TBDY for 4 storey models from the results found using Sap2000 program and the results were compared. The buildings were evaluated among themselves according to the reference model withhout plan disorder.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.