The release of ions that can significantly contribute toward cellular response is an important characteristic of bioactive glasses (BG). Here, ionic extracts of three different compositions of BG powders in 60 mol% SiO2, x mol% CaO (x = 28, 32 and 36), x mol% P2O5 (x = 12, 8 and 4) compositional system were utilized to study their effect on the viability, differentiation and mineralization of dental pulp stem cells (DPSCs) in vitro. ICP was applied to detect the exact ionic concentrations released from different composition of BG. DPSCs treated with conditioned media from the glass with 4 mol% P2O5 (BGCM1, media containing 44.01 ± 0.6 mg/L Si, 61.72 ± 0.1 mg/L Ca and 7.57 ± 0.01 mg/L P) were more metabolically active compared to conditioned media from the glass with 8 mol% P2O5 (BGCM2, media with 47.36 ± 0.7 mg/L Si, 57.4 ± 0.1 mg/L Ca and 14.54 ± 0.2 mg/L P), at all times tested, but in all cases the process was slower than the control. Cells exposed to media conditioned by the glass with 12 mol% P2O5 (BGCM3, 40.46 ± 0.5 mg/L Si, 61. 85 ± 0.3 mg/L Ca and 28.43 ± 0.3 mg/L P) responded differently, such that cells showed to be more metabolically active than control at day 3, but then similar to or lower than control at higher time points. Differentiation of DPSCs toward osteogenic lineage in the presence of BGCM was assessed by Alizarin red staining. Cells treated with high phosphate BGCM3 displayed a higher density of red mineralized nodules than cells treated with BGCM1 and BGCM2 after 21 days of culture in non-osteogenic medium. BGCM3 was therefore chosen for gene expression studies. Osteogenic differentiation of DPSCs in the presence and/or absence of BGCM3 or osteogenic supplements were studied by RT-PCR. Overall, the results demonstrated that, in the absence of osteogenic supplements, BGCM3 group showed a significantly higher mRNA expression levels for alkaline phosphatase at day 7, osteopontin and osteonectin at days 7 and 14, and a high level of collagen I at day 14, compared to negative control group (BM−). Overall, the results obtained from BGCM3 group are beneficial for the design and manufacture of scaffolds or particulates with tailored ion release for a range of bone repair applications

Bioactive glasses can heal bone defects and bond with bone through formation of hydroxyl carbonate apatite (HCA) surface layer. Sol-gel derived bioactive glasses are thought to have potential for improving bone regeneration rates over melt-derived compositions. The 58S sol-gel composition (60 mol% SiO2, 36 mol% CaO, and 4 mol% P2O5) has appeared in commercial products. Here, hydroxyapatite (HA) was found to form within the 58S glass during sol-gel synthesis after thermal stabilization. The preformed HA may lead to rapid release of calcium orthophosphate, or nanocrystals of HA, on exposure to body fluid, rather than the release of separate the calcium and phosphate species. Increasing the P2O5 to CaO ratio in the glass composition reduced preformed HA formation, as observed by XRD and solid-state NMR. Instead, above 12 mol% phosphate, a phosphate glass network (polyphosphate) formed, creating co-networks of phosphate and silica. Nanopore diameter of the glass and rate of HCA layer formation in simulated body fluid (SBF) decreased when the phosphate content increased

Bioactive glasses (BG) are known for their ability to induce bone formation by the action of their dissolution products. Glasses can deliver active ions at a sustained rate, determined by their composition and surface area. Nanoporous sol-gel derived BGs can biodegrade rapidly, which can lead to a detrimental burst release of ions and a pH rise. The addition of phosphate into the glass can buffer the pH during dissolution. Here, dissolution of BG with composition 60 mol% SiO 2 , 28 mol% CaO and 12 mol% P 2 O 5 at 600 µg/ml were investigated. Initially, the dissolution and apatite formation of the BG particulates were examined in simulated body fluid using FTIR and XRD. BG particulates were indirectly exposed to dental pulp stem cells, and the effect of 14 days continuous ion release on human dental pulp stem cells (hDPSC) viability and differentiation was evaluated. Alamar blue assay showed that cell proliferation was not inhibited by the continuous release of Ca, P and soluble silica. In fact, hDPSC in the presence of BG particulate displayed a higher density of mineralized nodules than untreated cells, as assessed by Alizarin red. The results will have a great contribution to the in vivo application of this particular BG.

Bioactive glasses stimulate bone regeneration but are brittle. Biomaterials are needed that share load with bone, promote bone regeneration and biodegrade at controlled rates. Sol-gel hybrids can achieve this through their intimate inorganic and organic co-networks, depending on the organic polymer used. Polycaprolactone degrades slowly but lacks functional groups for the critical step of covalent coupling to the silica co-network. Here, we synthesised a novel copolymer of caprolactone and glycidoxypropyl trimethoxysilane through one-pot ring opening polymerization (ROP). Hybrids with different organic content were fabricated using such a copolymer for the first time. The copolymer can directly bond to a silica network due its trimethoxysilane groups, which can hydrolyse, leaving silanol groups that undergo polycondensation with silanol groups of the silica network. Number of repeating units of caprolactone and glycidoxypropyl trimethoxysilane functional groups were controlled via ROP. The mechanical properties of the hybrids were tuned by weight percent and the number of repeating units of caprolactone independently, producing a homogeneous material with high strength (64 MPa) and strain to failure (20%) that deformed in a unique linear elastic manner until failure. MC3T3-E1 pre-osteoblast cells adhered to the hybrids. Introducing such a copolymer created a new way to fabricate covalently bonded polycaprolactone/silica hybrids for future bone repair.

The study reports the fabrication and in vitro biological evaluation of a sol-gel derived bioactive glass (BG) / polycaprolactone (PCL) composite fiber membrane, as a potential candidate for bone regeneration applications. The non woven composite mats were prepared by introducing the glass particles into the electrospinning process. Adding the glass improved the homogeneity of the fibers. The apatite forming ability of the membranes in simulated body fluid were evaluated and showed that hydroxyapatite had formed within 21 days in SBF and completely covered the surface of the membrane. In cell culture, dental pulp stem cells adhered proliferated and produced mineralized matrix on the PCL/BG fiber membrane.

We report the first inorganic/organic hybrids that show outstanding mechanical properties (withstanding cyclic loading) and bone bioactivity. This new hybrid material may fulfil the unmet clinical need for bioactive synthetic bone grafts that can withstand cyclic loading. A SiO2/PTHF/PCL-diCOOH sol-gel hybrid system, that combined inorganic and organic co-networks at the molecular level, previously demonstrated unprecedented synergy of properties, with excellent flexibility and promoted formation of articular cartilage matrix in vitro. Here, for the first time, calcium and phosphate ions were incorporated into the inorganic component of the hybrid network, to impart osteogenic properties. Calcium methoxyethoxide and triethyl phosphate were the calcium and phosphate precursors because they allow for incorporation into the silicate network at low temperature. The hybrid network was characterised with ATR-FTIR, XRD and solid-state Nuclear Magnetic Resonance, which proved calcium and phosphate incorporation and suggested the Ca2+ ions also interacted with PCL-diCOOH through ionic bonds. This resulted in an increased strength (17–64 MPa) and modulus of toughness (2.5–14 MPa) compared to the original SiO2/PTHF/PCL-diCOOH hybrid material (which showed strength of ∼3 MPa and modulus of toughness of ∼0.35 MPa), while also maintaining the ability to withstand cyclic loading. The presence of calcium and phosphates in the silicate network resulted in a more congruent dissolution of the inorganic and organic co-networks in TRIS buffer. This was shown by the presence of silicon, calcium and phosphate ions along with PCL in the TRIS buffer after 1 week, whereas Ca-free hybrids mainly released PCL with negligible Si dissolution. The presence of calcium and phosphates also enabled deposition of hydroxycarbonate apatite following immersion in simulated body fluid, which was not seen on Ca-free hybrid. All hybrids passed cell cytotoxicity tests and supported pre-osteoblast cell attachment. The phosphate-free hybrid showed the best mechanical behaviour and supported better cell attachment, spreading and potentially differentiation of cells. Therefore, the SiO2-CaO/PTHF/PCL-diCOOH hybrid represents a promising biomaterial for use in bone regeneration.

No abstract