This paper presents a novel design of a flexible and wearable E-shaped, multiband dipole antenna. The antenna has a low profile and is printed on a common 2 mm thick denim fabric ( ε r = 1.7 ). By installing a passively coupled rectangular patch with L-shaped cuts, the lower frequency band is supported and the bandwidth at higher frequencies is also enhanced. The antenna’s performance was observed under different deformations in free space as well as when it was placed on different parts of the human body. No significant changes in the characteristics of the frequency bands of interest were observed for the flexible antenna compared with the initial nondeformable antenna. Simulations for 10 g average specific absorption rate (SAR) at different input powers up to 250 mW were carried out considering that the antenna adheres well to the human body and there is no spacing or shielding. The obtained results show that the amount of energy absorbed by the body tissue increases by increasing the incident power.
A compact broadband planar monopole antenna fed by coplanar waveguide is developed and screen‐printed on the high dielectric constant microwave dielectric ceramic substrate for the applications of implanted biotelemetry. Biocompatible ceramic materials are selected for substrate (MgTa1.5Nb0.5O6, εr = 28) and superstrate (Al2O3, εr = 9.8). Additionally, for protecting from the tissue erosion, the metal parts (the body of the implanted antenna) are screen printed on a MgTa1.5Nb0.5O6 ceramic substrate and covered by a Al2O3 ceramic superstrate. Because the inductive loading effect generated by the rectangular type meander and the use of high dielectric constant ceramics, both size miniaturization and bandwidth enhancement can be achieved. The measured S11 of the proposed antenna in lossy emulated tissue is −43 dB, and the bandwidth of this proposed antenna can be improved to 100 MHz (351–461 MHz), which it is wide enough for the applications of modern MICS band (402–405 MHz) and ISM band (433–435 MHz). © 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52: 2136–2139, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.25376
Wireless body area networks (WBANs), because of their widespread applications in health care and industrial development, have an important share of the recent advancements of the Internet of things (IoT). The term "wireless" is a key element of any new user-friendly wearable technological devices in health monitoring. This concept is reinforced by the utilization of wearable antennas and ultimately leads to the integration of technique and clothes; therefore the concept of smart clothing has been introduced. Wearable antennas are different because they are planar, durable, and user friendly. In this regard, the most prevalent type of antenna that has variety of forms and patterns is the microstrip antenna. Planar antennas in general need flexible and thin substrates that enable them to be mounted on textiles. Consequently, materials such as felt, polyester, and denim are excellent candidates for the development of wearable antennas. The materials are known for having less loss in comparison to conventional substrates. However, the electromagnetic properties of such regular fabrics are not well known and are none of fabric manufacturer's concern. Therefore, a very simple technique to characterize the electromagnetic properties of sample fabrics as antenna substrates for wireless body communications in this study is proposed. Because microstrip antennas are less dependent on the imaginary part of the complex dielectric constant of the substrates, the unique method presented in this paper helps researchers determine the real part of the dielectric permittivity straightforwardly and without advanced knowledge of the substrate. The method can be considered as an example of applications of antennas to characterizing electromagnetic properties of materials. The structure of the method involves square-patch antennas that are directly fed at the center of the patch. The lowest resonance mode of the patch antenna is the key parameter in the process.Step-by-step procedures and materials used in this study to develop the method are explained and discussed. The stability and accuracy of the method is evaluated using simulations and measurements. 596
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.