This study investigated the use of ethylene glycol to form α-MoO3 (molybdenum trioxide) from ammonium molybdate tetrahydrate at various sintering temperatures for 1 h. During the sintering process, the morphologies of the constituents were observed using scanning electron microscopy (SEM), and Fourier transform infrared (FTIR) spectroscopy was used to explain the reaction process. In this work, the results obtained using X-ray photoelectron spectroscopy (XRD) demonstrated that, when the molybdenum trioxide powder was treated thermally at 300 °C, the material exhibited crystallinity. The peaks were indexed to correspond with the (110), (040), (021), (111), and (060) crystallographic planes, and the lattice parameters of a, b, and c were about 3.961, 13.876, and 3.969 Å. Using these observations, we confirmed that orthorhombic α-MoO3 was formed for sintering temperatures from 300 to 700 °C. Pattern images were obtained by the selected area electron diffraction pattern (SAED) technique, and the d distance of the high resolution transmission electron microscopy (HRTEM) images were almost 0.39 and 0.36 nm, and the Mo 3d5/2, Mo 3d3/2, and O 1s of X-ray photoelectron spectroscopy (XPS) were located at 233.76, 237.03, and 532.19 eV, which also demonstrated that α-MoO3 powder had been synthesized.

No abstract

In this study, tripropylene glycol was used as a reducting agent in the polyol process to reduce silver nitrate to the form of silver particles deposited onto the surface of bamboo charcoal (BC). The reduction temperature and time were critical parameters as they control the size of the silver particles formed as well as their distribution onto the surface of the BC. The reduction of silver nitrate by the tripropylene glycol occurred at a temperature of 120 °C for 3 h, and the silver particles, which had a face-centered cubic lattice structure, were distributed onto the surface of the BC. These synthesis conditions should work well with tripropylene glycol as reducing agent that can be helpful in the convenient preparation of Ag/BC particles. When Ag/BC powders were manufactured using 3 g of silver nitrate content, the prepared composites had the largest thermal conductivity at 0.2490 W/(m·K).