A single-resonator, stable dual-longitudinal-mode optofluidic microcavity laser based on a hollow-core microstructured optical fiber is proposed and experimentally demonstrated. The resonator and microfluidic channel are integrated in the hollow-core region of the fiber, inside which a hexagonal silica ring is used as the only resonator of the laser. Experimental results show that with mixing a small amount of Rhodamine B into a 1 mM Rhodamine 6G solution to form a dual-dye solution as a gain medium, the laser obtained by the method of lateral pumping can operate at dual longitudinal modes, with a threshold of 90 nJ/mm2. By adjusting the concentration of Rhodamine B, the lasing wavelength of the laser and the power ratio of the two wavelengths can be controlled. And because the laser emission is co-excited by different kinds of dye molecules, the mode competition is diminished, enabling the simultaneously efficient optical gain and therefore lasing at dual longitudinal modes stably with a maximum lasing intensity fluctuation of 3.2% within 30 minutes even if the dual longitudinal modes have the same linear polarization states. This work can open up promising opportunities for diverse applications in biosensing and medical diagnosis with high sensitivity and integrated photonics with compact structure.
Trapped in the stringent adiabatic transmission condition of high-order modes, low-loss fused biconical taper mode selective coupler (FBT-MSC) has long been challenging to achieve. We identify the adiabatic predicament of high-order modes to stem from the rapid variation of the eigenmode field diameter, which is caused by the large core-cladding diameter difference of few-mode fiber (FMF). We demonstrate that introducing a positive-index inner cladding in FMF is an effective approach to address this predicament. The optimized FMF can be used as dedicated fiber for FBT-MSC fabrication, and exhibits good compatibility with the original fibers, which is critical for the wide adoption of MSC. As an example, we add inner cladding in a step-index FMF to achieve excellent adiabatic high-order mode characteristics. The optimized fiber is used to manufacture ultra-low-loss 5-LP MSC. The insertion losses of the fabricated LP01, LP11, LP21, LP02 and LP12 MSCs are 0.13 dB at 1541 nm, 0.02 dB at 1553 nm, 0.08 dB at 1538 nm, 0.20 dB at 1523 nm, and 0.15 dB at 1539 nm, respectively, with smoothly varying insertion loss across the wavelength domain. Additional loss is less than 0.20 dB from 1465.00 nm to 1639.31 nm, and the 90% conversion bandwidth exceeds 68.03 nm, 166.68 nm, 174.31 nm, 132.83 nm, and 84.17 nm, respectively. MSCs are manufactured using commercial equipment and a standardized process that takes just 15 minutes, making them a potential candidate for low-cost batch manufacturing in a space division multiplexing system.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.