Reconfigurable intelligent surfaces (RIS) is a promising solution to build a programmable wireless environment via steering the incident signal in fully customizable ways with reconfigurable passive elements. In this paper, we consider a RISaided multiuser multiple-input single-output (MISO) downlink communication system. Our objective is to maximize the weighted sum-rate (WSR) of all users by joint designing the beamforming at the access point (AP) and the phase vector of the RIS elements, while both the perfect channel state information (CSI) setup and the imperfect CSI setup are investigated. For perfect CSI setup, a low-complexity algorithm is proposed to obtain the stationary solution for the joint design problem by utilizing the fractional programming technique. Then, we resort to the stochastic successive convex approximation technique and extend the proposed algorithm to the scenario wherein the CSI is imperfect. The validity of the proposed methods is confirmed by numerical results. In particular, the proposed algorithm performs quite well when the channel uncertainty is smaller than 10%.Index Terms-Reconfigurable intelligent surfaces (RIS), passive radio, multiple-input-multiple-output (MIMO), fractional programming, stochastic successive convex approximation.

In this paper, we introduce an intelligent reflecting surface (IRS) to provide a programmable wireless environment for physical layer security. By adjusting the reflecting coefficients, the IRS can change the attenuation and scattering of the incident electromagnetic wave so that it can propagate in a desired way toward the intended receiver. Specifically, we consider a downlink multiple-input single-output (MISO) broadcast system where the base station (BS) transmits independent data streams to multiple legitimate receivers and keeps them secret from multiple eavesdroppers. By jointly optimizing the beamformers at the BS and reflecting coefficients at the IRS, we formulate a minimum-secrecy-rate maximization problem under various practical constraints on the reflecting coefficients. The constraints capture the scenarios of both continuous and discrete reflecting coefficients of the reflecting elements. Due to the non-convexity of the formulated problem, we propose an efficient algorithm based on the alternating optimization and the path-following algorithm to solve it in an iterative manner. Besides, we show that the proposed algorithm can converge to a local (global) optimum. Furthermore, we develop two suboptimal algorithms with some forms of closed-form solutions to reduce the computational complexity. Finally, the simulation results validate the advantages of the introduced IRS and the effectiveness of the proposed algorithms.Index Terms-Intelligent reflecting surface, programmable wireless environment, physical layer security, beamforming.

Intelligent reflecting surface (IRS) is a promising solution to build a programmable wireless environment for future communication systems. In practice, an IRS consists of massive low-cost elements, which can steer the incident signal in fully customizable ways by passive beamforming. In this paper, we consider an IRS-aided multiuser multiple-input single-output (MISO) downlink communication system. In particular, the weighted sum-rate of all users is maximized by joint optimizing the active beamforming at the base-station (BS) and the passive beamforming at the IRS. In addition, we consider a practical IRS assumption, in which the passive elements can only shift the incident signal to discrete phase levels. This non-convex problem is firstly decoupled via Lagrangian dual transform, and then the active and passive beamforming can be optimized alternatingly. The active beamforming at BS is optimized based on the fractional programming method. Then, three efficient algorithms with closed-form expressions are proposed for the passive beamforming at IRS. Simulation results have verified the effectiveness of the proposed algorithms as compared to different benchmark schemes.Index Terms-Intelligent reflecting surface (IRS), large intelligent surface (LIS), passive radio, beamforming, multiple-inputmultiple-output (MIMO), fractional programming.

In this paper, a novel technique, called symbiotic radio (SR), is proposed for passive Internetof-Things (IoT), in which a backscatter device (BD) is integrated with a primary transmission. The primary transmitter is designed to assist the primary and BD transmissions, and the primary receiver decodes the information from the primary transmitter as well as the BD. We consider a multiple-input single-output (MISO) SR and the symbol period for BD transmission is designed to be either the same as or much longer than that of the primary system, resulting in parasitic or commensal relationship between the primary and BD transmissions. We first derive the achievable rates for the primary system and the BD transmission. Then, we formulate two transmit beamforming optimization problems, i.e., the weighted sum-rate maximization problem and the transmit power minimization problem, and solve these non-convex problems by applying semi-definite relaxation technique. In addition, a novel transmit beamforming structure is proposed to reduce the computational complexity of the solutions. Simulation results show that when the BD transmission rate is properly designed, the proposed SR not only enables the opportunistic transmission for the BD via energy-efficient passive backscattering, but also enhances the achievable rate of the primary system by properly exploiting the additional signal path from the BD. This paper has been presented in part at

No abstract