Wood-plastic composites (WPCs) are increasingly broadly applied composites that combine the merits of wood and plastics, such as the renewable, degradable, lightweight, and low-cost characteristics of wood, and the thermoplasticity, hydrophobicity, and toughness of plastics. However, WPCs also display the disadvantages of the two main components including hydrophilicity and flammability of wood, and weathering degradability, flammability, and thermal expansion of plastics. Coextruded WPCs (Co-WPCs) are multilayer composites in which regular WPCs are coated with a protective shell layer through coextrusion. The core-shell structure of Co-WPCs provides a way to overcome the shortcomings of WPCs by modifications specific to the composite surfaces. This review summarizes the studies of Co-WPCs in terms of their mechanical properties, moisture absorption, weathering, flame resistance, and dimensional stability. It also presents expectations for the further development of Co-WPCs.

The effects on the internal defects of the rice straw (RS)/high-density polyethylene (HDPE) composites are investigated by removing the extractives with cold water (CW), hot water (HW), and 1% alkaline (AL) solution. The characteristics of the RSs are measured by chemical composition, Fourier transform infrared, X-ray diffractometry, scanning electron microscopy, thermogravimetric analysis, and bulk density testing. The three extractive removal methods change the surface features of the RS and increase the interphase adhesion between the RS and the HDPE matrix. As a result, the inner defects of the RS/HDPE composites are eradicated and the die swell phenomenon disappear. The flexural modulus, flexural strength, and impact strength of the final composites increase by 95.59, 83.29, and 154.79% in the HW extraction method. The CW and the AL extraction also significantly improve the static mechanical properties of the obtained RS/HDPE composites.

The removal of rice straw extractives increases the interphase adhesion between rice straw and the high-density polyethylene (HDPE) matrix, while eradicating the inner defects of rice straw/HDPE composites. This study investigated the effect of rice straw extractives removal on the dimensional stability (water uptake and thermal expansion), dynamic mechanical properties, creep, and stress relaxation of rice straw/HDPE composites. Cold water (CW), hot water (HW), and 1% alkaline solution (AL) extraction methods were utilized to remove rice straw extractives. Extracted and unextracted rice straws were mixed with HDPE, maleated polyethylene (MAPE), and Polyethylene wax to prepare composites via extrusion. Removal of rice straw extractives significantly improved the dimensional stability, dynamic mechanical properties, and creep and stress relaxation of rice straw/HDPE composites, with the exception of the thickness swelling of the AL/HDPE and the thermal expansion of the rice straw/HDPE composites. HW/HDPE exhibited the best comprehensive performance.

In this work, titanium dioxide (TiO2)-incorporated rice straw fiber (RS)/poly(butylene succinate) (PBS) biocomposites were prepared by injection molding with different TiO2 powder loadings. The RS/PBS with 1 wt% TiO2 demonstrated the best mechanical properties, where the flexural strength and modulus increased by 30.34% and 28.39%, respectively, compared with RS/PBS. The non-isothermal crystallization of neat PBS, RS/PBS composites, and titanium-dioxide-incorporated RS/PBS composites was investigated by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The non-isothermal crystallization data were analyzed using several theoretical models. The Avrami and Mo kinetic models described the non-isothermal crystallization behavior of neat PBS and the composites; however, the Ozawa model was inapplicable. The crystallization temperature (Tc), half-time of crystallization (t1/2), and kinetic parameters (FT) showed that the crystallizability followed the order: TiO2-incorporated RS/PBS composites > RS/PBS > PBS. The RS/PBS with 1 wt% TiO2 showed the best crystallization properties. The Friedman model was used to evaluate the effective activation energy of the non-isothermal crystallization of PBS and its composites. Rice straw fiber and TiO2 acted as nucleating agents for PBS. The XRD results showed that the addition of rice straw fiber and TiO2 did not substantially affect the crystal parameters of the PBS matrix. Overall, this study shows that RS and TiO2 can significantly improve the crystallization and mechanical properties of PBS composites.