Designing electrocatalysts with high-performance for both reduction and oxidation reactions faces severe challenges. Here, the uniform and ultrasmall (~3.4 nm) high-entropy alloys (HEAs) Pt18Ni26Fe15Co14Cu27 nanoparticles are synthesized by a simple low-temperature oil phase strategy at atmospheric pressure. The Pt18Ni26Fe15Co14Cu27/C catalyst exhibits excellent electrocatalytic performance for hydrogen evolution reaction (HER) and methanol oxidation reaction (MOR). The catalyst shows ultrasmall overpotential of 11 mV at the current density of 10 mA cm−2, excellent activity (10.96 A mg−1Pt at −0.07 V vs. reversible hydrogen electrode) and stability in the alkaline medium. Furthermore, it is also the efficient catalyst (15.04 A mg−1Pt) ever reported for MOR in alkaline solution. Periodic DFT calculations confirm the multi-active sites for both HER and MOR on the HEA surface as the key factor for both proton and intermediate transformation. Meanwhile, the construction of HEA surfaces supplies the fast site-to-site electron transfer for both reduction and oxidation processes.

Electrocatalytic nitrogen reduction reaction (NRR) has been an important area for many scientists. However, high voltage requirements, low NH3 yield, and poor stability remain the biggest challenges for NRR. Here, novel high‐entropy alloys RuFeCoNiCu nanoparticles with small size (≈16 nm) and uniformity, prepared in oil phase at atmospheric pressure and low temperature (≤250 °C) are reported for the first time and are applied to NRR. According to the experiments, there is a high NH3 yield at a low overpotential. It has a surprising NH3 yield of 57.1 µg h–1 mgcat−1 (11.4 µg h–1 cm–2) at 0.05 V versus RHE in 0.1 m KOH, and the corresponding Faradaic efficiency reaches 38.5%, which is the electrocatalyst with the highest NH3 yield at the voltage of 0.05 V versus RHE reported so far. Similarly, the material also exhibits excellent electrochemical properties in other electrolytes such as 0.1 m Li2SO4, 0.1 m Na2SO4, and 0.1 m HCl electrolytes. Besides, after the 100 h test, only slightly diminished in activity. Theoretical calculation shows that Fe surrounded by alloy metals is the best site for N2 adsorption and activation. Co‐Cu and Ni‐Ru couples show an excellent capacity to surface hydrogenation at a low overpotential.

Although intensive efforts have been made and great progress has been achieved relating to the electrocatalytic hydrogen evolution reaction (HER), an advanced synthesis strategy for an efficient electrocatalyst is still the most significant goal.

Understanding the composition evolution of grain boundaries and grain boundary precipitation at near-atomic scale in aluminum alloys is crucial to tailor mechanical properties and to increase resistance to corrosion and stress corrosion cracking. Here, we elucidate the sequence of precipitation on grain boundaries in comparison to the bulk in a model Al-Zn-Mg-Cu alloy. We investigate the material from the solution heat treated state (475°C), through the very early stages of aging to the peak aged state at 120°C and further into the overaged regime at 180°C. The process starts with solute enrichment on grain boundaries due to equilibrium segregation accompanied by solute depletion in their vicinity, the formation of Guinier-Preston (GP) zones in the solute-enriched grain boundary regions, and GP zones growth and transformation. The equilibrium segregation of solutes to grain boundaries during aging accelerates this sequence compared to the bulk. Analysis of the ~10 nm wide precipitate-free zones (PFZs) adjacent to the solute-enriched grain boundaries shows that the depletion zones are determined by (i) interface equilibrium segregation; (ii) formation and coarsening of the grain boundary precipitates and (iii) the diffusion range of solutes in the matrix. In addition, we quantify the difference in kinetics between grain boundary and bulk precipitation. The precipitation kinetics, as observed in terms of volume fraction, average radius, and number density, is almost identical next to the depletion zone in the bulk and far inside the bulk grain remote from any grain boundary influence. This observation shows that the region influenced by the grain boundaries does not extend beyond the PFZs.

The development of strong-scaling computational tools for high-throughput methods with an open-source code and transparent metadata standards has successfully transformed many computational materials science communities. While such tools are mature already in the condensed-matter physics community, the situation is still very different for many experimentalists. Atom probe tomography (APT) is one example. This microscopy and microanalysis technique has matured into a versatile nano-analytical characterization tool with applications that range from materials science to geology and possibly beyond. Here, data science tools are required for extracting chemo-structural spatial correlations from the reconstructed point cloud. For APT and other high-end analysis techniques, post-processing is mostly executed with proprietary software tools, which are opaque in their execution and have often limited performance. Software development by members of the scientific community has improved the situation but compared to the sophistication in the field of computational materials science several gaps remain. This is particularly the case for open-source tools that support scientific computing hardware, tools which enable high-throughput workflows, and open well-documented metadata standards to align experimental research better with the fair data stewardship principles. To this end, we introduce paraprobe, an open-source tool for scientific computing and high-throughput studying of point cloud data, here exemplified with APT. We show how to quantify uncertainties while applying several computational geometry, spatial statistics, and clustering tasks for post-processing APT datasets as large as two billion ions. These tools work well in concert with Python and HDF5 to enable several orders of magnitude performance gain, automation, and reproducibility.

Ni‐rich layered oxides are significantly promising cathode materials for commercial high‐energy‐density lithium‐ion batteries. However, their major bottlenecks limiting their widespread applications are capacity fading and safety concerns caused by their inherently unstable crystal structure and highly reactive surface. Herein, surface structure and bulk charge regulation are concurrently achieved by introducing high‐valence Ta5+ ions in Ni‐rich cathodes, which exhibit superior electrochemical properties and thermal stability, especially a remarkable cyclic stability with a capacity retention of 80% for up to 768 cycles at a 1C rate versus Li/Li+. Due to the partial Ta enrichment on surface, the regulated surface enables high reversibility of Li+ insertion/extraction by preventing surface Ni reduction in deep charging. Moreover, bulk charge regulation that boosts charge density and its localization on oxygen remarkably suppresses microcracks and oxygen loss, which in turn prevents the fragmentation of the regulated surface and structural degradation associated with oxygen skeleton. This study highlights the significance of an integrated optimization strategy for Ni‐rich cathodes and, as a case study, provides a novel and deep insights into the underlying mechanisms of high‐valence ions substitution of Ni‐rich layered cathodes.

The hydrogen evolution reaction (HER) is one of the most significant reactions in the electrolysis water process, and electrocatalysts which possess high mass activity and excellent stability are the most important driving factors to improve the efficiency of HER. As for the efficient commercially electrocatalyst, Pt/C is limited in development because of its high cost. Therefore, the study of non-Pt high-efficiency catalysts is particularly important at this moment. Here, we creatively report for the first time a kind of RuPdM (M= Ni, Co, Fe) ultrathin nanosheets (NSs), which exhibit extraordinary electrochemical properties for HER under alkaline conditions. The overpotential of optimized trimetallic Ru38Pd34Ni28 ultrathin NSs is only 20 mV (10 mA cm–2), and the mass activity reaches 6.15 A mg–1noble metal at −0.07 V vs RHE. It can be compared to Pt-based electrocatalysts, which have the highest mass activity currently reported. The durability tests also prove that the stability of the electrocatalyst is outstanding. DFT calculations disclose that the flexible modulation of electronic structures of RuPd ultrathin NSs is achieved by utilizing the additional 3d transition metals Fe, Co, and Ni. In particular, the Ni-3d bands act as the continuous electron-supply center for Ru to ensure an efficient electron transfer toward the adsorbates. Meanwhile, the stable Pd sites are critical for coupling the O-2pπ orbital in the initial H2O splitting with a facile barrier. This work will open up a new era of non-Pt materials for alkaline hydrogen evolution toward practical application.

No abstract