Based on the space curve meshing equation, in this article, a geometry design of a novel circular arc helical gear mechanism with pure rolling for parallel transmission was presented. Different from conventional circular arc gears, the meshing points of circular arc helical gears were limited at the instantaneous centre of rotation. The parameter equations describing the contact curves for both the driving gear and the driven gear were deduced from the space curve meshing equation, and parameter equations of the concave-convex circular arc profiles were established both for internal meshing and external meshing. Furthermore, a formula for the contact ratio was presented, and the impact factors influencing the contact ratio were discussed. Then, the parameter design was presented for the geometry parameters of tooth profiles, such as normal pitch, tooth height and tooth thickness. Using the deduced equations, several numerical examples were then considered, and prototype samples were produced to experimentally validate the contact ratio equation and the theoretical kinematic performance. The circular arc helical gear mechanism investigated in this study showed a high gear transmission performance such as a pure rolling meshing, a high contact ratio and a large comprehensive strength, when considering engineering applications.
The design, dynamic modelling, and workspace are presented in this paper concerning cooperative cable parallel manipulators for multiple mobile cranes (CPMMCs). The CPMMCs can handle complex tasks that are more difficult or even impossible for a single mobile crane. Kinematics and dynamics of the CPMMCs are studied on the basis of geometric methodology and dʹAlembert's principle, and a mathematical model of the CPMMCs is developed and presented with dynamic simulation. The constant orientation workspace analysis of the CPMMCs is carried out additionally. As an example, a cooperative cable parallel manipulator for triple mobile cranes with 6 Degrees of Freedom is investigated on the basis of the above design objectives.
SUMMARYA continuous finite-time control scheme for networked bilateral teleoperation is proposed in this brief. The terminal sliding mode technology is used and new master–slave torques are designed. With the new controller, the coordination error of the master manipulator and the slave manipulator converges to zero in finite time. Moreover, the reaching time and the sliding time can be derived. Finally, the comparisons are performed and simulations show the effectiveness of the proposed approach.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.