A robust water oxidation catalyst based on copper oxide was prepared by facile electrodeposition of Cu2+ from borate buffer solution under near neutral conditions. The Cu–Bi thin film exhibits high activity and long-term stability in Cu2+-free pH 9 borate buffer. A steady current density of 1.2 mA/cm2 was sustained for at least 10 h at 1.3 V versus NHE without iR compensation, which sets a new benchmark for copper-based OEC.

One of the most pervasive environmental issues is water contaminated with oil or organic solvents; this global challenge calls for emerging materials that could effectively separate oil or organic solvents from water. Here, such a material is presented by integrating 3D porous graphene foam (GF) with a smart pH‐responsive surface, showing switchable superoleophilic and superoleophobic properties in response to the medium pH. The key chemistry applied in this study is to modify the 3D porous GF with an amphiphilic copolymer containing a block of poly(2‐vinylpyridine) and polyhexadecyl acrylate (P2VP‐b‐PHA), resulting in a smart GF (ss‐GF) with an either superoleophilic or superoleophobic surface at different medium pH. The as‐designed ss‐GF can effectively absorb oil or organic solvents from the aqueous media by using its superoleophilic surface at pH of 7.0, and it can also completely release the adsorbates when the pH is switched to 3.0 (and the surface of ss‐GF is therefore shifted to superoleophobic); with a continuous operation of many cycles (e.g., >10). Furthermore, the as‐designed ss‐GF shows superior absorption capacity for oil and organic solvent, with a high capacity of ≈196 times of the weight relative to that of the pristine ss‐GF. The present work suggests encouraging applications of the ss‐GF to water–oil and water–organic solvent separation.

The modulation of the swelling ability of the hydrogel matrix by pH-stimulus enables the dynamic control of the swelling forces, thereby obtaining effective diffusivity and permeability of the solutes, or mechanical energy from the hydrogel. In this work, a chemo-electro-mechanical model describing hydrogel behavior, based on multi-field effects, is developed to simulate the swelling and shrinking of these fascinating bio-materials, and it is termed the multi-effect-coupling pH-stimulus (MECpH) model. This model accounts for the ionic fluxes within both the hydrogel and solution, the coupling between the electric field, ionic fluxes, and mechanical deformations of the hydrogel. The main contribution of this model is to incorporate the relationship between the concentrations of the ionized fixed-charge groups and the diffusive hydrogen ion, which follows a Langmuir isotherm, into the Poisson-Nernst-Planck system. To validate this MECpH model, one-dimensional steady-state simulations under varying pH solution are carried out via a meshless Hermite-Cloud methodology, and the numerical results are compared with available experimental data. It is shown that the presently developed MECpH model is accurate, efficient, and numerically stable.