In an urban area, the demand for taxis is not always matched up with the supply. This paper proposes mining historical data to predict demand distributions with respect to contexts of time, weather, and taxi location. The four-step process consists of data filtering, clustering, semantic annotation, and hotness calculation. The results of three clustering algorithms are compared and demonstrated in a web mash-up application to show that context-aware demand prediction can help improve the management of taxi fleets.

Patients with CHB who develop diabetes are at an increased risk of liver cirrhosis and its decompensation over time.

No abstract

Several fog episodes occurred in California's San Joaquin Valley during winter 2000/2001.Measurements revealed the fogs to generally be less than 50 m deep, but to contain high liquid water contents (frequently exceeding 200 mg/m 3 ) and large droplets. The composition of the fog water was dominated by ammonium (median concentration= 608 μN), nitrate (304 μN), and organic carbon (6.9 ppmC), with significant contributions also from nitrite (18 μN) and sulfate (56 μN). Principal organic species included formate (median concentration= 32 μN), acetate (31 μN), and formaldehyde (21 μM). High concentrations of ammonia resulted in high fog pH values, ranging between 5.8 and 8.0 at the core measurement site. At this high pH aqueous phase oxidation of dissolved sulfur dioxide and reaction of S (IV) with formaldehyde to form hydroxymethanesulfonate are both important processes. The fogs are also effective at scavenging and removal of airborne particulate matter. Deposition velocities for key solutes in the fog are typically of the order of 1-2 cm/s, much higher than deposition velocities of precursor accumulation mode aerosol particles. Variations were observed in deposition velocities for individual constituents in the order NO 2 − >fogwater>NH 4 + >TOC ∼ SO 4 2− >NO 3 − . Nitrite, observed to be enriched in large fog drops, had a deposition velocity higher than the average fogwater deposition velocity, due to the increase in drop settling velocity with size. Species enriched in small fog drops (NH 4 + , TOC, SO 4 2− , and NO 3 − ) all had deposition velocities smaller than observed for fogwater. Typical boundary layer removal rates for major fog solute species were estimated to be approximately 0.5-1 μg m −3 h −1 , indicating the important role regional fogs can play in reducing airborne pollutant concentrations.

No abstract

No abstract

No abstract

Recently, 2D materials of indium selenide (InSe) layers have attracted much attention from the scientific community due to their high mobility transport and fascinating physical properties. To date, reports on the synthesis of high-quality and scalable InSe atomic films are limited. Here, a synthesis of InSe atomic layers by vapor phase selenization of In O in a chemical vapor deposition (CVD) system, resulting in large-area monolayer flakes or thin films, is reported. The atomic films are continuous and uniform over a large area of 1 × 1 cm , comprising of primarily InSe monolayers. Spectroscopic and microscopic measurements reveal the highly crystalline nature of the synthesized InSe monolayers. The ion-gel-gated field-effect transistors based on CVD InSe monolayers exhibit n-type channel behaviors, where the field effect electron mobility values can be up to ≈30 cm V s along with an on/off current ratio, of >10 at room temperature. In addition, the graphene can serve as a protection layer to prevent the oxidation between InSe and the ambient environment. Meanwhile, the synthesized InSe films can be transferred to arbitrary substrates, enabling the possibility of reassembly of various 2D materials into vertically stacked heterostructures, prompting research efforts to probe its characteristics and applications.