This paper proposed a method to characterize the complex permittivities of samples based on the enhancement of the electric field strength. The enhanced field method significantly improves the measuring range and accuracy of the samples' electrical properties. Full-wave simulations reveal that the resonant frequency is closely related to the dielectric constant of the sample. In addition, the loss tangent can be determined from the measured quality factor and the just obtained dielectric constant. Materials with low dielectric constant and very low loss tangent are measured for benchmarking and the measured results agree well with previous understanding. Interestingly, materials with extremely high dielectric constants (ε(r) > 50), such as titanium dioxide, calcium titanate, and strontium titanate, differ greatly as expected.
This work presents the measurement of the complex permittivities of high density polyethylene (HDPE), linear low density polyethylene (LLDPE), low density polyethylene (LDPE), polypropylene (PP), Nylon, and thermoplastic vulcanizates (TPV) in irregular shapes at the microwave frequency. A Teflon sample holder was employed to pack irregularly shaped plastic materials with various volumetric percentages. The samples were put into a resonant cavity with an enhanced electric field in its center, which is known as the enhanced-field method (EFM). The resonant frequencies and the quality factors at different volumetric percentages were measured by a network analyzer and compared with simulated results using a full-wave simulator (high-frequency structure simulator (HFSS)). Three simulation models, layer, ring, and hybrid, are proposed and compared with the experimental results. It is found that the hybrid model (denoted as Z5R5) with five heights and five radii in the partition is the most suitable. The complex permittivities of six plastic materials were evaluated by the contour maps of the HFSS simulation using the hybrid model. The measured complex permittivities of the irregularly shaped polymers agree well with their counterparts in bulk form.
The coupling of the electric and magnetic fields leads to a strong interplay in materials' permittivity and permeability. Here, we proposed a specially designed cavity, called the mu cavity. The mu cavity, consisting of a mushroom structure inside a cylindrical resonator, is exclusively sensitive to permeability, but not to permittivity. It decouples materials' electromagnetic properties and allows an accurate measurement of the permeability. With the help of an epsilon cavity, these two cavities jointly determine the complex permeability and permittivity of the materials at microwave frequencies. Homemade epoxy-based composite materials were prepared and tested. Measurement and manipulation of the permeability and permittivity of the epoxy composites will be shown. The results will be compared with the effective medium theories.
To uncover the intriguing non-thermal microwave effect, an experiment was conducted using an amplifier rather than an oscillator as the radiation source, which was injected into an applicator with strong electromagnetic field enhancement. The characteristics of the applicator are discussed and the enhancement of the microwave field is illustrated and explained. Thermal distribution is simulated based on the calculated microwave field profile. It was demonstrated that the proposed system heated a SiC susceptor to a temperature of 637 °C with the input power of 60 W. The reasons for such an efficient heating are discussed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.