In this work, we present the use of reduced graphene oxide (rGO) as the counter electrode materials in dye-sensitized solar cells (DSSCs). rGO was first deposited on a fluorine-doped tin oxide glass substrate by screen-printing, followed by post-treatment to remove excessive organic additives. We investigated the effect of atmospheric pressure plasma jet (APPJ) treatment on the DSSC performance. A power conversion efficiency of 5.19% was reached when DSSCs with an rGO counter electrode were treated by APPJs in the ambient air for a few seconds. For comparison, it requires a conventional calcination process at 400 °C for 15 min to obtain comparable efficiency. Scanning electron micrographs show that the APPJ treatment modifies the rGO structure, which may reduce its conductivity in part but simultaneously greatly enhances its catalytic activity. Combined with the rapid removal of organic additives by the highly reactive APPJ, DSSCs with APPJ-treated rGO counter electrode show comparable efficiencies to furnace-calcined rGO counter electrodes with greatly reduced process time. This ultrashort process time renders an estimated energy consumption per unit area of 1.1 kJ/cm(2), which is only one-third of that consumed in a conventional furnace calcination process. This new methodology thus saves energy, cost, and time, which is greatly beneficial to future mass production.

No abstract

Atmospheric pressure plasma jet (APPJ) technology is a versatile technology that has been applied in many energy harvesting and storage devices. This feature article provides an overview of the advances in APPJ technology and its application to solar cells and batteries. The ultrafast APPJ sintering of nanoporous oxides and 3D reduced graphene oxide nanosheets with accompanying optical emission spectroscopy analyses are described in detail. The applications of these nanoporous materials to photoanodes and counter electrodes of dye-sensitized solar cells are described. An ultrashort treatment (1 min) on graphite felt electrodes of flow batteries also significantly improves the energy efficiency. OPEN ACCESSCoatings 2015, 5 27

A molecular recognition concept exploiting multiple-hydrogen-bond fine-tuned excited-state proton-transfer (ESPT) was conveyed using 3,4,5,6-tetrahydrobis(pyrido[3,2-g]indolo)[2,3-a:3',2'-j]acridine (1a). The catalytic type 1a/carboxylic acids hydrogen-bonding (HB) complexes undergo ultrafast ESPT, resulting in an anomalously large Stokes shifted tautomer emission (lambdamax approximately 600 nm). Albeit forming a quadruple HB complex, ESPT is prohibited in the noncatalytic-type 1a/urea complexes (lambdamax approximately 430 nm). The HB configuration tuning ESPT properties lead to a feasible design for sensing multiple-HB-site analytes of biological interest.

ARTICLE This journal isWe demonstrate the rapid fabrication of dye-sensitized solar cells (DSSCs) with both TiO2 photoanodes and Pt counter-electrodes processed using atmospheric pressure plasma jets (APPJs). The rapid conversion of PtCl6 2to Pt for the counter-electrode of DSSCs is achieved using a 1-min 360°C air-quenched N2 APPJ. The APPJ-processed Pt counter-electrode is then used together with an APPJ-calcined nanoporous TiO2 photoanode to make the DSSCs that exhibit comparable efficiencies to those of cells fabricated using conventional furnace-calcination processes. APPJs can reduce the calcination durations from 30 min to 4 min for the nanoporous TiO2 photoanode and from 15 min to 1 min for the Pt counter electrode. The ultra-short processes of DSSCs are benefited from the synergistic effects of the energetic nitrogen molecules and the heat of APPJs.

No abstract

No abstract