Induction motors are critical components for most industries and the condition monitoring has become necessary to detect faults. There are several techniques for fault diagnosis of induction motors and analyzing the startup transient vibration signals is not as widely used as other techniques like motor current signature analysis. Vibration analysis gives a fault diagnosis focused on the location of spectral components associated with faults. Therefore, this paper presents a comparative study of different timefrequency analysis methodologies that can be used for detecting faults in induction motors analyzing vibration signals during the startup transient. The studied methodologies are the time-frequency distribution of Gabor (TFDG), the time-frequency Morlet scalogram (TFMS), multiple signal classification (MUSIC), and fast Fourier transform (FFT). The analyzed vibration signals are one broken rotor bar, two broken bars, unbalance, and bearing defects. The obtained results have shown the feasibility of detecting faults in induction motors using the time-frequency spectral analysis applied to vibration signals, and the proposed methodology is applicable when it does not have current signals and only has vibration signals. Also, the methodology has applications in motors that are not fed directly to the supply line, in such cases the analysis of current signals is not recommended due to poor current signal quality.
Quaternions can be used as an alternative to model the fundamental patterns of electroencephalographic (EEG) signals in the time domain. Thus, this article presents a new quaternion-based technique known as quaternion-based signal analysis (QSA) to represent EEG signals obtained using a brain-computer interface (BCI) device to detect and interpret cognitive activity. This quaternion-based signal analysis technique can extract features to represent brain activity related to motor imagery accurately in various mental states. Experimental tests in which users where shown visual graphical cues related to left and right movements were used to collect BCI-recorded signals. These signals were then classified using decision trees (DT), support vector machine (SVM) and k-nearest neighbor (KNN) techniques. The quantitative analysis of the classifiers demonstrates that this technique can be used as an alternative in the EEG-signal modeling phase to identify mental states.
A bioinspired locomotion system for a quadruped robot is presented. Locomotion is achieved by a spiking neural network (SNN) that acts as a Central Pattern Generator (CPG) producing different locomotion patterns represented by their raster plots. To generate these patterns, the SNN is configured with specific parameters (synaptic weights and topologies), which were estimated by a metaheuristic method based on Christiansen Grammar Evolution (CGE). The system has been implemented and validated on two robot platforms; firstly, we tested our system on a quadruped robot and, secondly, on a hexapod one. In this last one, we simulated the case where two legs of the hexapod were amputated and its locomotion mechanism has been changed. For the quadruped robot, the control is performed by the spiking neural network implemented on an Arduino board with 35% of resource usage. In the hexapod robot, we used Spartan 6 FPGA board with only 3% of resource usage. Numerical results show the effectiveness of the proposed system in both cases.
Brain-computer interfaces(BCI) are a mechanism to record the electrical signals of the brain and translate them into commands to operate an output device like a robotic system. This article presents the development of a real-time locomotion system of a hexapod robot with bio-inspired movement dynamics inspired in the stick insect and tele-operated by cognitive activities of motor imagination. Brain signals are acquired using only four electrodes from a BCI device and sent to computer equipment for processing and classification by the iQSA method based on quaternion algebra. A structure consisting of three main stages are proposed: (1) signal acquisition, (2) data analysis and processing by the iQSA method, and (3) bio-inspired locomotion system using a Spiking Neural Network (SNN) with twelve neurons. An off-line training stage was carried out with data from 120 users to create the necessary decision rules for the iQSA method, obtaining an average performance of 97.72%. Finally, the experiment was implemented in realtime to evaluate the performance of the entire system. The recognition rate to achieve the corresponding gait pattern is greater than 90% for BCI, and the time delay is approximately from 1 to 1.5 seconds. The results show that all the subjects could generate their desired mental activities, and the robotic system could replicate the gait pattern in line with a slight delay. INDEX TERMS Bio-inspired robot, Brain-Computer Interface (BCI), electroencephalography, hexapod robot, iQSA method, motor imagery, spiking neural network, central pattern generator.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.