Abstract:A hydrophobic associating polymer named DiPHAM (acrylamide/sodium acrylamide-2-methylpropanesulfonic/sodium acrylate/N,N-di-n-dodecylacrylamide) with good salt tolerance was synthesized via photo-initiation polymerization. The critical association concentration (CAC) of DiPHAM was determined by viscosity changes to be 490 mg/L with different DiPHAM concentrations and particle sizes varied under such dynamic conditions. The influences of aqueous metal ions with different charges on its aqueous solution were investigated by measuring apparent viscosity, viscoelasticity, thixotropy, rheology, and particle size, and by SEM observation. The apparent viscosity of the DiPHAM solution was affected by metal ions to some extent, but the viscosity of the polymer can be still maintained at 55 mPa·s under 20 × 10 4 mg/L NaCl. Divalent metal ions show greater impact on DiPHAM aqueous solutions, but the polymer solutions showed resistance to the changes caused in viscosity, structure, and viscoelasticity by Ca 2+ and Mg 2+ ions. The salt tolerance of DiPHAM is due to the combination of hydrophobic association, the electrostatic shield, and double layer compression of the hydration shell. Increasing the ion concentration enhances the dehydration and further compresses the hydration shell, making the non-structural viscosity decrease, even "salting out". Measurements of rheological properties showed that DiPHAM solutions could maintain a relatively high viscosity (0.6%-71 mPa·s/0.3%-50 mPa·s) after 120 min of continuous shearing (170 s −1 ) at 140 • C. Under high-salinity (5000 mg/L Ca 2+ /3000 mg/L Mg 2+ ) conditions, the solution with 0.6 wt% DiPHAM still maintained a high viscosity (50 mPa·s/70 mPa·s) after continuously shearing for 120 min at 120 • C and 170 s −1 . The good salt tolerance of DiPHAM can lead to a variety of applications, including in fracturing fluids for enhanced oil recovery (EOR) and in sewage treatment.
Three kinds of drag reducer were synthesized by inverse emulsion polymerization and named PHWAM-1, PHWAM-2, and PHWAM-3. Drag reduction (DR) tests showed that the three drag reducers have different DR characteristics in fresh water and various saline waters because of their different types of hydrophobic monomers. PHWAM-1, without hydrophobic monomers, performs better in fresh water, while PHWAM-2 and PHWAM-3, with hydrophobic monomers, perform better in brine. In addition, PHWAM-3, which has twin-tailed hydrophobic monomers, performs best in high-concentration brine. Measurements of micro-particle size and observations of spatial structure suggest that although the stronger hydrophobic polymer has no DR advantage over a linear polymer in fresh water, the molecular chains form a mutually associative supporting structure that improves the DR performance over that of a linear polymer in high-concentration brine.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.