In this study, a dynamic response analysis procedure is proposed and applied to investigate the dynamic responses of a straddle-type concrete-filled steel tube tied arch bridge under train and truck loadings. A numerical model of the coupled monorail train-bridge system is established to investigate the dynamic behaviors of the bridge under moving trains. A refined three-dimensional finite element model is built for the bridge and a 15 degrees-of-freedom vehicle model is presented for the train. The numerical model is validated using in-situ test results and then used to analyze the dynamic displacement and acceleration of the bridge and the trains on the bridge. Based on the simulation results, the impact factor of the bridge is investigated and the riding comfort of the trains is evaluated. The investigation results show that the impact factor of vehicle loads reaches the maximum value when the resonance of the bridge is induced by the moving vehicles. The effect of train braking predominates the longitudinal vibration of the bridge but is negligible in the transverse and vertical directions. The vehicle speed is the dominating factor for the riding comfort of the train.
Operation safety of high-speed trains is dependent on their vibration characteristics, which vary with bridge deformation. This paper studies the influence of bridge pier settlement and girder creep camber, which are two typical types of long-term bridge deformation, on the vibration of high-speed trains. To this end, an analytical approach is presented to link the bridge deformation with railway track deformation; the track deformation is used to analyze the vibration of the CRH2 high-speed train in China. The vibration analysis results are validated using the in-situ measurement data. The present study shows that bridge pier settlement greatly affects the vertical acceleration, derailment coefficient and wheel unloading rate of the high-speed train; incorporating bridge girder camber aggravates the vibration of the train–bridge system. The threshold of bridge pier settlement is suggested to be 11.1[Formula: see text]mm for trains moving at 350[Formula: see text]km/h with regard to the code-specified vibration limit. This study has significant implications for the design and operation of high-speed railways.
The dynamic responses of an asymmetrical arch railway bridge subjected to moving trains are experimentally and numerically investigated in this study. The strains, displacements and accelerations at critical sections of the bridge were measured at different speeds of trains. A three-dimensional finite element model of the bridge-vehicle coupling system was established to understand the measured dynamic responses and was validated against the experimental results. The numerical model was used to analyze the influence of asymmetry on the dynamic responses of the bridge and the safety and ride comfort of trains. The results indicate that the dynamic responses of the bridge increase with the train speed. Braking of the train has the largest impact on the vertical dynamic displacement of the bridge. The maximum dynamic strain is in the arch rib. The longer half arch demonstrated much larger counterforce and dynamic responses than those of the shorter half arch, while the symmetrical structures tend to exhibit good symmetry. The asymmetrical arrangement of the bridge reduces the structural stiffness.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.