The type and concentration of dissolved gases in transformer insulating oil are used to assess transformer conditions. In this paper, an online detection setup for measuring the concentration of multicomponent gases dissolved in transformer insulating oil is developed, which consists of an oil-gas separation system and an optical system for acquiring the transformer status in real time. The oil-gas separation system uses low pressure, constant temperature, and low-frequency stirring as working conditions for degassing large-volume oil samples based on modified headspace degassing. The optical system uses tunable diode laser absorption spectroscopy (TDLAS) to determine the gas concentration. Six target gases (methane, ethylene, ethane, acetylene, carbon monoxide, and carbon dioxide) were detected by three near-infrared lasers (1569, 1684, and 1532 nm). The stability of the optical system was improved by the common optical path formed by time-division multiplexing (TDM) technology. The calibration experiments show that the second harmonics and the concentrations of the six gases are linear. A comparison experiment with gas chromatography (GC) demonstrates that the error of acetylene reaches the nL/L level, while the other gases reach the μL/L level. The data conforms to the power industry testing standards, and the state of the transformer is analyzed by the detected six characteristic gases. The setup provides an effective basis for the online detection of dissolved gas in transformer insulating oil.
The feasibility of a scheme in which the concentration of CO2 in gas-liquid solution is directly measured based on PZT piezoelectric-photoacoustic spectroscopy was evaluated. The existing device used for the measurement of gas concentration in gas-liquid solution has several limitations, including prolonged duration, loss of gas, and high cost due to the degassing component. In this study, we developed a measuring device in order to solve the problems mentioned above. Using this device, how the intensity of the photoacoustic signal changes with the concentration of CO2 was demonstrated through experiment. The impact that variation of the laser modulation frequency has on the photoacoustic signal was also studied. Furthermore, the experimental data generated from measuring the concentration of CO2 in gas-liquid solution was verified for a wide range of concentrations. It was found that, not only can the error rate of the device be less than 7%, but the time of measurement can be within 60 s. To sum up, the scheme is highly feasible according to the experimental results, which makes measurement of the concentration of a gas in gas-liquid solution in the future more straightforward.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.