The naturally available cyclodextrin has opened up a wide range of research avenues because of its superior characteristics such as being non‐toxic, biocompatible, and edible. The cyclodextrin is the green multifunctional material that can add to the triboelectric series and extend its self‐powered applications. The ultrasonic synthesized cyclodextrin metal–organic framework (CD‐MOF) designed using sodium as a metal ion and cyclodextrin as a ligand for the triboelectric nanogenerator is reported. The various detailed characterizations of the CD‐MOFs give an insight into the properties of the synthesized material. The Kelvin probe force microscopy suggests three types of CD‐MOFs, exhibiting a positive potential. As per the surface potential, the output of the various CD‐MOF based TENG is varied as alpha CD MOF/Teflon > gamma CD‐MOF/Teflon > beta CD‐MOF/Teflon. The alpha CD MOF/Teflon TENG produces an electrical output of 152 V, 1.2 μA, and 14.3 nC, respectively. The fabricated device output is utilized for powering numerous low‐power electronics through a capacitor and bridge rectifier circuit. The multiunit Z‐shaped TENG device is attached to various surfaces such as the shoe heel and the backside of the school bag, and the corresponding energy harvesting response is demonstrated.

The transfer of graphene from its growth substrate to a target substrate has been widely investigated for its decisive role in subsequent device integration and performance. Thus far, various reported methods of graphene transfer have been mostly limited to planar or curvilinear surfaces due to the challenges associated with fractures from local stress during transfer onto three-dimensional (3D) microstructured surfaces. Here, we report a robust approach to integrate graphene onto 3D microstructured surfaces while maintaining the structural integrity of graphene, where the out-of-plane dimensions of the 3D features vary from 3.5 to 50 μm. We utilized three sequential steps: (1) substrate swelling, (2) shrinking, and (3) adaptation, in order to achieve damage-free, large area integration of graphene on 3D microstructures. Detailed scanning electron microscopy, atomic force microscopy, Raman spectroscopy, and electrical resistance measurement studies show that the amount of substrate swelling as well as the flexural rigidities of the transfer film affect the integration yield and quality of the integrated graphene. We also demonstrate the versatility of our approach by extension to a variety of 3D microstructured geometries. Lastly, we show the integration of hybrid structures of graphene decorated with gold nanoparticles onto 3D microstructure substrates, demonstrating the compatibility of our integration method with other hybrid nanomaterials. We believe that the versatile, damage-free integration method based on swelling, shrinking, and adaptation will pave the way for 3D integration of two-dimensional (2D) materials and expand potential applications of graphene and 2D materials in the future.

One of the most pressing technological challenges in the development of next generation nanoscale devices is the rapid, parallel, precise and robust fabrication of nanostructures. Here, we demonstrate the possibility to parallelize thermochemical nanolithography (TCNL) by employing five nano-tips for the fabrication of conjugated polymer nanostructures and graphene-based nanoribbons.

Atomic force microscope (AFM) cantilevers with integrated heaters enable nanometer-scale heat flow measurements, materials characterization, nanomanufacturing, and many other applications. When a heated AFM cantilever tip is in contact with a substrate, the interface is a nanometer-scale hotspot whose temperature can be controlled over a large temperature range. Over the past decade, there has been significant improvements in the understanding of heat flows within and from a heated an AFM cantilever. There have also been improvements in the characterization and calibration of these heated AFM cantilevers. These advancements have led to new heated AFM cantilever designs and have enabled new applications of heated AFM cantilevers. This chapter describes research into heat transfer fundamentals, cantilever technology, and applications of heated AFM cantilevers.