MXene has shown enormous potential in scientific fields, including energy storage and electromagnetic interference (EMI) shielding. Unfortunately, MXene-based material structures generally suffer from mechanical fragility and vulnerability to oxidation. Herein, musselinspired dopamine successfully addresses those weaknesses by improving interflake interaction and ordering in MXene assembled films. Dopamine undergoes in situ polymerization and binding at MXene flake surfaces by spontaneous interfacial charge transfer, yielding an ultrathin adhesive layer. Resultant nanocomposites with highly aligned tight layer structures achieve approximately seven times enhanced tensile strength with a simultaneous increase of elongation. Ambient stability of MXene films is also greatly improved by the effective screening of oxygen and moisture. Interestingly, angstrom thick polydopamine further promotes the innate high electrical conductivity and excellent EMI shielding properties of MXene films. This synergistic concurrent enhancement of physical properties proposes MXene/polydopamine hybrids as a general platform for MXene based reliable applications.

Graphene fibers (GFs) are promising elements for flexible conductors and energy storage devices, while translating the extraordinary properties of individual graphene sheets into the macroscopically assembled 1D structures. We report that a small amount of water addition to the graphene oxide (GO) N -methyl-2-pyrrolidone (NMP) dispersion has significant influences on the mesophase structures and physical properties of wet-spun GFs. Notably, 2 wt % of water successfully hydrates GO flakes in NMP dope to form a stable graphene oxide liquid crystal (GOLC) phase. Furthermore, 4 wt % of water addition causes spontaneous planarization of wet-spun GFs. Motivated from these interesting findings, we develop highly electroconductive and mechanically strong flat GFs by introducing highly crystalline electrochemically exfoliated graphene (EG) in the wet-spinning of NMP-based GOLC fibers. The resultant high-performance hybrid GFs can be sewn on cloth, taking advantage of the mechanical robustness and high flexibility.

Block copolymer (BCP) lithography is an effective nanopatterning methodology exploiting nanoscale self-assembled periodic patterns in BCP thin films. This approach has a critical limitation for nonplanar substrate geometry arising from the reflow and modification of BCP films upon the thermal or solvent annealing process, which is inevitable to induce the mobility of BCP chains for the self-assembly process. Herein, reflow-free, 3D BCP nanopatterning is demonstrated by introducing a conformally grown adlayer by the initiated chemical vapor deposition (iCVD) process. A highly cross-linked poly­(divinylbenzene) layer was deposited directly onto the BCP thin film surface by iCVD, which effectively prevented the reflow of BCP thin film during an annealing process. BCP nanopatterns could be stabilized on various substrate geometry, including a nonplanar deformed polymer substrate, a pyramid shape substrate, and a graphene fiber surface. A fiber-type hydrogen evolution reaction (HER) catalyst is suggested by stabilizing lamellar Pt nanopatterns on severely rough graphene fiber surfaces.

Electrospun fibrous mats have gained popularity in bioengineering over the past decade, but few papers detail their degradative mechanisms. To address this, blends of hydrophobic poly(ε-caprolactone) (PCL) and hydrophilic PGA-PCL-PGA triblock copolymer were electrospun into aligned fibrous mats to assess the copolymers' mechanical and degradative properties. Increased hydrophilic triblock content led to enhanced morphological uniformity of fiber, tightening of fiber diameters, increased storage and Young's modulus, and decreased elongation. The corresponding decrease in hydrophobic PCL content led to faster hydrolytic degradation rate, as reflected by enhanced decrease in mass, molecular weight, and modulus loss at 25, 37, and 45°C. The activation energy for hydrolytic degradation for 15:85 PCL: triblock copolymer was approximately half that of 85:15 PCL: triblock copolymer. Detailed examination of fiber morphology and crystallinity revealed initial surface erosion followed by the evolution of crystalline lamellar stacks and bulk degradation at 37°C. Because of the high surface to volume and short diffusion length scale of the small diameter fibers, surface and bulk degradation may both contribute to the hydrolytic degradative behavior of these electrospun fibrous mats. Electrospun mats' distinct architecture that embodies high specific surface to volume and interfiber porous ultrastructures that lead to their unique degradative behaviors hold much potential for significant impact in the field of tissue engineering and controlled drug delivery.

Helix structures, which are frequently observed in nature, act as versatile structural templates for complex functionalities with asymmetry and anisotropy. However, atomically thin 2D materials, including graphene, transition metal dichalcogenides (TMDs), and MXenes, do not have inherent chirality in their planar geometry and cannot easily form such a structure. This study presents the macroscopic self-assembly of 2D materials for helical screws with an Archimedean spiral arrangement. The naturally triggered spontaneous rotation upon the 1D fiber assembly of 2D materials forms helical screws consisting of multiple helices and perversions. For a clear understanding of the morphological evolution of helical screws, variations in the helical pitch and angle are systematically analyzed considering thermodynamic and kinetic conditions. Subsequently, the influence of spontaneous helix formation on the properties of the 2D assembled fibers is investigated in terms of the solvent-driven actuator performance and electrical and electrothermal properties. The suggested approach provides a new perspective on the directed selfassembly of inherently achiral 2D materials toward chiral helix formation.