Reverse transformation has been frequently used to refine austenite grain size for refining ferrite, pearlite and martensite structures. However, kinetics and microstructure change during reverse transformation to austenite has not been examined systematically compared with the austenite decomposition reaction. Therefore, alloying effects of 1mass% Mn, Si and Cr on reverse transformation kinetics from pearlite and tempered martensite structures in Fe-0.6mass%C alloys were investigated in this study. Vickers hardness of all the specimens increases with increasing holding time at 1073K because reversely-formed austenite transforms to martensite by quenching. In the reverse transformation from pearlite structure, the kinetics of reverse transformation is hardly changed by the Mn addition while Si and Cr additions delay it. Kinetics of reverse transformation from tempered martensite structure becomes slower than from the pearlite structure in all the alloys. In particular, retarding effect by the Cr addition is most significant among those elements.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.