The main objective of this paper is to develop a prediction model using Response Surface Methodology (RSM) and Artificial Neural Network (ANN) for the turning process of Aluminum alloy 6061 round rod. The turning experiments carried out based on the Central Composite Design (CCD) of Response Surface Methodology. The influence of three independent variables such as Cutting speed (150, 175 and 200 mm/ min), depth of cut (0.5, 1 and 1.5 mm) and feed rate (0.1, 0.2 and 0.3 mm/rev) on the Surface Roughness (Ra) were analyzed through analysis of variance (ANOVA). The response graphs from the Analysis of Variance (ANOVA) present that feed-rate has the strongest influence on Ra dependent on cutting speed and depth of cut. Surface response methodology developed between the machining parameters and response and confirmation experiments reveals that the good agreement with the regression models. The coefficient of determination value for RSM model is found to be high (R2 = 0.961). It indicates the goodness of fit for the model and high significance of the model. From the result, the maximum error between the experimental value and ANN model is less than the RSM model significantly. However, if the test patterns number will be increased then this error can be further minimized. The proposed RSM and ANN prediction model sufficiently predict Ra accurately. However, ANN prediction model is found to be better compared to RSM model. The artificial neutral network is applied to experimental results to find prediction results for two response parameters. The predicted results taken from ANN show a good agreement between experimental and predicted values with the mean squared error of training indices equal to (0.000) which produces flexibility to the manufacturing industries to select the best setting based on applications.
In this paper, Analysis Of Variance (ANOVA), Artificial Neural Network (ANN), and Genetic Algorithm (GA) have been studied to predict the effect of milling parameters on the Surface Roughness (Ra) during machining of mild steel alloy. The milling experiments carried out based on the Taguchi design of experiments method using (L16) orthogonal array with 3 factors and 4 levels. The influence of three independent variables such as spindle speed (910, 930, 960, and 1000 rpm), feed rate (93, 95, 98, and 102 mm/min), and Tool Diameter (8, 10, 12, and 14 mm) on the Surface Roughness (Ra) were tested and analyzed with (ANOVA) to predict the response which indicates that spindle speed was the most significant factor effecting on Surface Roughness (Ra). Artificial Neural Network (ANN) and numerical methods are used widely for modeling and predict the performance of manufacturing technologies. Neural Network technique with 2 hidden layers, 10 neurons size, 1000 epochs, and Trainlm transfer function is used to predict the result. The Genetic Algorithm (GA) has been utilized to find optimal cutting conditions during a milling process. From the results, the optimal value of spindle speed is (930 rpm), feed-rate is (95 mm/min) and tool diameter is (8 mm). This network structure is capable of predicting the Surface Roughness (Ra) well to optimize the milling parameters. Artificial Neural Network (ANN) predicted results indicate good agreement between the experimental and the predicted values.
The Artificial Neural Network (ANN) and numerical methods are used widely for modeling and predict the performance of manufacturing technologies. In this paper, the influence of milling parameters (spindle speed (rpm), feed rate (mm/min) and tool diameter (mm)) on material removal rate were studied based on Taguchi design of experiments method using (L16) orthogonal array with 3 factor and 4 levels and Neural Network technique with two hidden layers and neurons. The experimental data were tested with analysis of variance and artificial neural network model has been proposed to predict the responses. Analysis of variance result shows that tool diameters were the most significant factors that effect on material removal rate. The predicted results show a good agreement between experimental and predicted values with mean squared error equal to (0.000001), (0.00003025), (0.002601) and (0.006889) respectively, which produce flexibility to the manufacturing industries to select the best setting based on applications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.