Calcaneocuboid distraction arthrodesis can be used to treat stage 2 posterior tibial tendon dysfunction. Nonunion, graft resorption, and implant failure have been reported after this procedure. This study compared two of the most commonly used methods for fixation of calcaneocuboid distraction arthrodesis. Twelve pairs of cadaver feet underwent simulated calcaneocuboid distraction arthrodesis. One specimen in each pair was fixed with two crossed 3.5 mm cortical lag screws. The contralateral specimen was fixed with a cervical H-plate. The calcaneus was fixed and a load was applied to the plantar aspect of the cuboid at a rate of 5 mm/minute until joint separation of 3 mm or fracture occurred. The average applied load to failure at 1.0 mm of joint separation was 30.5 +/- 11.6 N for the crossed screws and 77.7 +/- 36.4 N for the cervical H-plate (p = 0.001). The average stiffness at 1.0 mm of joint separation was 27.5 +/- 10.9 N/mm for the crossed screws and 43 +/- 21.2 N/mm for the cervical H-plate (p = 0.036). The higher stiffness and load to failure may account for the decreased nonunion rate noted anecdotally by some surgeons with H-plate fixation over crossed screw fixation for calcaneocuboid distraction arthrodesis.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.