Li-ion batteries have contributed to the commercial success of portable electronics and may soon dominate the electric transportation market provided that major scientific advances including new materials and concepts are developed. Classical positive electrodes for Li-ion technology operate mainly through an insertion-deinsertion redox process involving cationic species. However, this mechanism is insufficient to account for the high capacities exhibited by the new generation of Li-rich (Li(1+x)Ni(y)Co(z)Mn(1-x-y-z)O₂) layered oxides that present unusual Li reactivity. In an attempt to overcome both the inherent composition and the structural complexity of this class of oxides, we have designed structurally related Li₂Ru(1-y)Sn(y)O₃ materials that have a single redox cation and exhibit sustainable reversible capacities as high as 230 mA h g(-1). Moreover, they present good cycling behaviour with no signs of voltage decay and a small irreversible capacity. We also unambiguously show, on the basis of an arsenal of characterization techniques, that the reactivity of these high-capacity materials towards Li entails cumulative cationic (M(n+)→M((n+1)+)) and anionic (O(2-)→O₂(2-)) reversible redox processes, owing to the d-sp hybridization associated with a reductive coupling mechanism. Because Li₂MO₃ is a large family of compounds, this study opens the door to the exploration of a vast number of high-capacity materials.
Present Li-ion batteries for portable electronics are based on inorganic electrodes. For upcoming large-scale applications the notion of materials sustainability produced by materials made through eco-efficient processes, such as renewable organic electrodes, is crucial. We here report on two organic salts, Li(2)C(8)H(4)O(4) (Li terephthalate) and Li(2)C(6)H(4)O(4)(Li trans-trans-muconate), with carboxylate groups conjugated within the molecular core, which are respectively capable of reacting with two and one extra Li per formula unit at potentials of 0.8 and 1.4 V, giving reversible capacities of 300 and 150 mA h g(-1). The activity is maintained at 80 degrees C with polyethyleneoxide-based electrolytes. A noteworthy advantage of the Li(2)C(8)H(4)O(4) and Li(2)C(6)H(4)O(4) negative electrodes is their enhanced thermal stability over carbon electrodes in 1 M LiPF(6) ethylene carbonate-dimethyl carbonate electrolytes, which should result in safer Li-ion cells. Moreover, as bio-inspired materials, both compounds are the metabolites of aromatic hydrocarbon oxidation, and terephthalic acid is available in abundance from the recycling of polyethylene terephthalate.
Although Li-rich layered oxides (Li1+xNiyCozMn1-x-y-zO2 > 250 mAh g(-1)) are attractive electrode materials providing energy densities more than 15% higher than today's commercial Li-ion cells, they suffer from voltage decay on cycling. To elucidate the origin of this phenomenon, we employ chemical substitution in structurally related Li2RuO3 compounds. Li-rich layered Li2Ru1-yTiyO3 phases with capacities of ~240 mAh g(-1) exhibit the characteristic voltage decay on cycling. A combination of transmission electron microscopy and X-ray photoelectron spectroscopy studies reveals that the migration of cations between metal layers and Li layers is an intrinsic feature of the charge-discharge process that increases the trapping of metal ions in interstitial tetrahedral sites. A correlation between these trapped ions and the voltage decay is established by expanding the study to both Li2Ru1-ySnyO3 and Li2RuO3; the slowest decay occurs for the cations with the largest ionic radii. This effect is robust, and the finding provides insights into new chemistry to be explored for developing high-capacity layered electrodes that evade voltage decay.
Inhibition of hemozoin biocrystallization is considered the main mechanism of action of 4-aminoquinoline antimalarials including chloroquine (CQ) but cannot fully explain the activity of ferroquine (FQ) which has been related to redox properties and intramolecular hydrogen bonding. Analogues of FQ, methylferroquine (Me-FQ), ruthenoquine (RQ), and methylruthenoquine (Me-RQ), were prepared. Combination of physicochemical and molecular modeling methods showed that FQ and RQ favor intramolecular hydrogen bonding between the 4-aminoquinoline NH group and the terminal amino group in the absence of water, suggesting that this structure may enhance its passage through the membrane. This was further supported by the use of Me-FQ and Me-RQ where the intramolecular hydrogen bond cannot be formed. Docking studies suggest that FQ can interact specifically with the {0,0,1} and {1,0,0} faces of hemozoin, blocking crystal growth. With respect to the structure-activity relationship, the antimalarial activity on 15 different P. falciparum strains showed that the activity of FQ and RQ were correlated with each other but not with CQ, confirming lack of cross resistance. Conversely, Me-FQ and Me-RQ showed significant cross-resistance with CQ. Mutations or copy number of pfcrt, pfmrp, pfmdr1, pfmdr2, or pfnhe-1 did not exhibit significant correlations with the IC(50) of FQ or RQ. We next showed that FQ and Me-FQ were able to generate hydroxyl radicals, whereas RQ and me-RQ did not. Ultrastructural studies revealed that FQ and Me-FQ but not RQ or Me-RQ break down the parasite digestive vacuole membrane, which could be related to the ability of the former to generate hydroxyl radicals.
We report the direct synthesis of powder Na3Ti2(PO4)3 together with its low-potential electrochemical performance and crystal structure elucidation for the reduced and oxidized phases. First-principles calculations at the density functional theory level have been performed to gain further insight into the electrochemistry of Ti(IV)/Ti(III) and Ti(III)/Ti(II) redox couples in these sodium superionic conductor (NASICON) compounds. Finally, we have validated the concept of full-titanium-based sodium ion cells through the assembly of symmetric cells involving Na3Ti2(PO4)3 as both positive and negative electrode materials operating at an average potential of 1.7 V.
Batteries for electrical storage are central to any future alternative energy paradigm. The ability to probe the redox mechanisms occurring at electrodes during their operation is essential to improve battery performances. Here we present the first report on Electron Paramagnetic Resonance operando spectroscopy and in situ imaging of a Li-ion battery using Li2Ru0.75Sn0.25O3, a high-capacity (>270 mAh g−1) Li-rich layered oxide, as positive electrode. By monitoring operando the electron paramagnetic resonance signals of Ru5+ and paramagnetic oxygen species, we unambiguously prove the formation of reversible (O2)n− species that contribute to their high capacity. In addition, we visualize by imaging with micrometric resolution the plating/stripping of Li at the negative electrode and highlight the zones of nucleation and growth of Ru5+/oxygen species at the positive electrode. This efficient way to locate ‘electron’-related phenomena opens a new area in the field of battery characterization that should enable future breakthroughs in battery research.
Progress over the last two decades in positive electrode materials for Li-ion batteries has generated a variety of novel materials. The Li-rich rocksalt oxides Li 2 MO 3 (M = 3d/4d/5d transition metal) are especially promising, displaying capacities exceeding 300 mAh/g thanks to the participation of the oxygen non-bonding O(2p) orbitals in the redox process.Understanding the oxygen redox limitations and the role of O/M ratio is therefore crucial for the rational design of materials with improved electrochemical performances. Herein, we push oxygen redox to its limits with the discovery of a new Li 3 IrO 4 compound (O/M = 4) which can reversibly uptake and release 3.5 e-per transition metal; the highest capacity ever reported for any positive insertion electrode, via the cumulative activation of cationic and anionic redox processes. By quantitatively monitoring the oxidation process, we demonstrate the material instability against O 2 release upon removal of all Li. Accordingly; we find the fully-delithiated phase to undergo irreversible amorphization producing a new a-IrO 3 phase with a local structure made of threefold connected IrO 6 octahedra. Our results show that the O/M parameter delineates the boundary between the material's maximum capacity and its stability, hence providing valuable insights for further high capacity materials developments.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.