Natural gas has become the dominant source of electricity in the United States, and technologies capable of efficiently removing carbon dioxide (CO2) from the flue emissions of natural gas–fired power plants could reduce their carbon intensity. However, given the low partial pressure of CO2 in the flue stream, separation of CO2 is particularly challenging. Taking inspiration from the crystal structures of diamine-appended metal–organic frameworks exhibiting two-step cooperative CO2 adsorption, we report a family of robust tetraamine-functionalized frameworks that retain cooperativity, leading to the potential for exceptional efficiency in capturing CO2 under the extreme conditions relevant to natural gas flue emissions. The ordered, multimetal coordination of the tetraamines imparts the materials with extraordinary stability to adsorption-desorption cycling with simulated humid flue gas and enables regeneration using low-temperature steam in lieu of costly pressure or temperature swings.

Hydrogen holds promise as a clean alternative automobile fuel, but its on-board storage presents significant challenges due to the low temperatures and/or high pressures required to achieve a sufficient energy density. The opportunity to significantly reduce the required pressure for high density H 2 storage persists for metal-organic frameworks due to their modular structures and large internal surface areas. The measurement of H 2 adsorption in such materials under conditions most relevant to on-board storage is crucial to understanding how these materials would perform in actual applications, although such data have to date been lacking. In the present work, the metalorganic frameworks M 2 (m-dobdc) (M = Co, Ni; m-dobdc 4− = 4,6-dioxido-1,3benzenedicarboxylate) and the isomeric frameworks M 2 (dobdc) (M = Co, Ni; dobdc 4− = 1,4dioxido-1,3-benzenedicarboxylate), which are known to have open metal cation sites that strongly interact with H 2 , were evaluated for their usable volumetric H 2 storage capacities over a range of near-ambient temperatures relevant to on-board storage. Based upon adsorption isotherm data, Ni 2 (m-dobdc) was found to be the top-performing physisorptive storage material with a usable volumetric capacity between 100 and 5 bar of 11.0 g/L at 25 °C and 23.0 g/L with a temperature swing between −75 and 25 °C. Additional neutron diffraction and infrared spectroscopy experiments performed with in situ dosing of D 2 or H 2 were used to probe the hydrogen storage properties of these materials under the relevant conditions. The results provide benchmark characteristics for comparison with future attempts to achieve improved adsorbents for mobile hydrogen storage applications.

Metal–organic frameworks are among the most promising materials for industrial gas separations, including the removal of carbon dioxide from natural gas, although substantial improvements in adsorption selectivity are still sought. Herein, we use equilibrium adsorption experiments to demonstrate that the flexible metal–organic framework Co­(bdp) (bdp2– = 1,4-benzene­dipyrazolate) exhibits a large CO2 adsorption capacity and approaches complete exclusion of CH4 under 50:50 mixtures of the two gases, leading to outstanding CO2/CH4 selectivity under these conditions. In situ powder X-ray diffraction data indicate that this selectivity arises from reversible guest templating, in which the framework expands to form a CO2 clathrate and then collapses to the nontemplated phase upon desorption. Under an atmosphere dominated by CH4, Co­(bdp) adsorbs minor amounts of CH4 along with CO2, highlighting the importance of studying all relevant pressure and composition ranges via multicomponent measurements when examining mixed-gas selectivity in structurally flexible materials. Altogether, these results show that Co­(bdp) may be a promising CO2/CH4 separation material and provide insights for the further study of flexible adsorbents for gas separations.

Selective nitrogen adsorption via backbonding in a metal-organic framework with exposed vanadium sites. # These authors contributed equally to this work Industrial processes prominently feature π-acidic gases, and an adsorbent capable of selectively interacting with these molecules could enable a number of important chemical separations 1-4 . In nature, enzymes, and correspondingly their synthetic analogues, use accessible, reducing metal centers to bind and even activate weakly π-acidic species such as N 2 through backbonding interactions 5-7 , and incorporation of similar moieties into a porous material should give rise to a new mechanism of adsorption for these gaseous substrates 8 .However, synthetic challenges have prevented realization of such a material. Here, we report a metal-organic framework featuring exposed vanadium(II) centers with an electronic configuration and 3d-orbital energies conducive to the back-donation of electron density to weak π-acids, thereby enabling highly selective adsorption. This new adsorption mechanism, together with the presence of a high concentration of available adsorption sites, results in record N 2 capacities and selectivities for the removal of N 2 from mixtures with CH 4 , while further enabling the separation of olefins from paraffins at elevated temperatures.Ultimately, incorporating such π-basic metal centers into tunable porous materials offers a new handle for capturing and activating key molecular species within next-generation adsorbents.The implementation of adsorbent-based technology stands as a promising route toward mitigating the high energy and emission costs associated with current industrial chemical The synthesis of V 2 Cl 2.8 (

The widespread implementation of H2 as a fuel is currently hindered by the high pressures or cryogenic temperatures required to achieve reasonable storage densities. In contrast, the realization of materials that strongly and reversibly adsorb hydrogen at ambient temperatures and moderate pressures could transform the transportation sector and expand adoption of fuel cells in other applications. To date, however, no adsorbent has been identified that exhibits a binding enthalpy within the optimal range of −15 to −25 kJ/mol for ambient-temperature hydrogen storage. Here, we report the hydrogen adsorption properties of the metal-organic framework (MOF) V2Cl2.8(btdd) (H2btdd, bis(1H-1,2,3-triazolo[4,5b],[4′,5′-i])dibenzo [1,4]dioxin), which features exposed vanadium(II) sites capable of backbonding with weak π acids. Significantly, gas adsorption data reveal that this material binds H2 with an enthalpy of −21 kJ/mol. This binding energy enables usable hydrogen capacities that exceed that of compressed storage under the same operating conditions. The Kubas-type vanadium(II)-dihydrogen complexation is characterized by a combination of techniques. From powder neutron diffraction data, a V-D2(centroid) distance of 1.966(8) Å is obtained, the shortest yet reported for a MOF. Using in situ infrared spectroscopy, the vibration of the vanadium-bound H2 is identified, and it displays a red shift of 242 cm −1 relative to free H2. Electronic structure calculations show that a main contribution to bonding stems from the interaction between the vanadium dπ and H2 σ* orbital. Ultimately, the pursuit of MOFs containing high densities of weakly π-basic metal sites may enable storage capacities under ambient conditions that far surpass those accessible with compressed gas storage.

The drug olsalazine (H4olz) was employed as a ligand to synthesize a new series of mesoporous metal–organic frameworks that are expanded analogues of the well-known M2(dobdc) materials (dobdc4– = 2,5-dioxido-1,4-benzene­dicarboxylate; M-MOF-74). The M2(olz) frameworks (M = Mg, Fe, Co, Ni, and Zn) exhibit high surface areas with large hexagonal pore apertures that are approximately 27 Å in diameter. Variable temperature H2 adsorption isotherms revealed strong adsorption at the open metal sites, and in situ infrared spectroscopy experiments on Mg2(olz) and Ni2(olz) were used to determine site-specific H2 binding enthalpies. In addition to its capabilities for gas sorption, the highly biocompatible Mg2(olz) framework was also evaluated as a platform for the delivery of olsalazine and other encapsulated therapeutics. The Mg2(olz) material (86 wt % olsalazine) was shown to release the therapeutic linker through dissolution of the framework under simulated physiological conditions. Furthermore, Mg2(olz) was used to encapsulate phenethylamine (PEA), a model drug for a broad class of bioactive compounds. Under simulated physiological conditions, Mg2(olz)­(PEA)2 disassembled to release PEA from the pores and olsalazine from the framework itself, demonstrating that multiple therapeutic components can be delivered together at different rates. The low toxicity, high surface areas, and coordinatively unsaturated metal sites make these M2(olz) materials promising for a range of potential applications, including drug delivery in the treatment of gastrointestinal diseases.

The design of stable adsorbents capable of selectively capturing dioxygen with a high reversible capacity is a crucial goal in functional materials development. Drawing inspiration from biological O 2 carriers, we demonstrate that coupling metal-based electron transfer with secondary coordination sphere effects in the metal-organic framework Co 2 (OH) 2 (bbta) (H 2 bbta = 1H,5H-benzo(1,2-d:4,5-d′)bistriazole) leads to strong and reversible adsorption of O 2. In particular, moderate-strength hydrogen bonding stabilizes a cobalt(III)-superoxo species formed upon O 2 adsorption. Notably, O 2-binding in this material weakens as a function of loading, as a result of negative cooperativity arising from electronic effects within the extended framework lattice. This unprecedented behavior extends the tunable properties that can be used to design metal-organic frameworks for adsorption-based applications.

Coordinatively unsaturated metal sites within certain zeolites and metal−organic frameworks can strongly adsorb a wide array of substrates. While many classical examples involve electronpoor metal cations that interact with adsorbates largely through physical interactions, unsaturated electron-rich metal centers housed within porous frameworks can often chemisorb guests amenable to redox activity or covalent bond formation. Despite the promise that materials bearing such sites hold in addressing myriad challenges in gas separations and storage, very few studies have directly interrogated mechanisms of chemisorption at open metal sites within porous frameworks. Here, we show that nondissociative chemisorption of H 2 at the trigonal pyramidal Cu + sites in the metal−organic framework Cu I -MFU-4l occurs via the intermediacy of a metastable physisorbed precursor species. In situ powder neutron diffraction experiments enable crystallographic characterization of this intermediate: the first time that this has been accomplished for any material. Evidence for a precursor intermediate is also afforded from temperature-programmed desorption and density functional theory calculations. The activation barrier separating the precursor species from the chemisorbed state is shown to correlate with a change in the Cu + coordination environment that enhances π-backbonding with H 2 . Ultimately, these findings demonstrate that adsorption at framework metal sites does not always follow a concerted pathway and underscore the importance of probing kinetics in the design of next-generation adsorbents.