Ferropenic anemy is the leading iron deficiency disease in the world. The aim was to encapsulate erythrocytes extracted from the blood of Cavia porcellus, in matrices of tara gum and native potato starch. For microencapsulation, solutions were prepared with 20% erythrocytes; and encapsulants at 5, 10, and 20%. The mixtures were spray-dried at 120 and 140 °C. The iron content in the erythrocytes was 3.30 mg/g and between 2.32 and 2.05 mg/g for the encapsulates (p < 0.05). The yield of the treatments varied between 47.84 and 58.73%. The moisture, water activity, and bulk density were influenced by the temperature and proportion of encapsulants. The total organic carbon in the atomized samples was around 14%. The particles had diverse reddish tonalities, which were heterogeneous in their form and size; openings on their surface were also observed by SEM. The particle size was at the nanometer level, and the zeta potential (ζ) indicated a tendency to agglomerate and precipitation the solutions. The presence of iron was observed on the surface of the atomized by SEM-EDX, and FTIR confirmed the encapsulation due to the presence of the chemical groups OH, C-O, C-H, and N-H in the atomized. On the other hand, high percentages of iron release in vitro were obtained between 88.45 and 94.71%. The treatment with the lowest proportion of encapsulants performed at 140 °C obtained the best results and could potentially be used to fortify different functional foods.
Edible films prepared from biological materials are being massively used. This study aimed to prepare edible films from native potato starch of the Allcca sipas variety (Solanum tuberosum subsp. Andigena), nopal mucilage (Opuntia ficus indica), and glycerol. Twelve edible films were prepared with starch, mucilage, and glycerin in different proportions by thermosynthesis. It was observed that mucilage and glycerol have a significant direct effect on film solubility and an inverse effect on aw, while the effect of starch is the opposite. The aw ranged from 0.562 to 0.639. The FTIR analysis showed the interaction of the components in the films being considerably influenced by the addition of mucilage. The TGA/DTA analysis reported low thermal stability in the films, retaining water around 100 °C, and showing a tendency to lose weight when the content of starch is high, while the opposite occurred with the addition of mucilage; it was also observed that around 310 °C, the maximum weight loss was observed between 53.6 and 86.1%. SEM images showed uniform films without cracks. The results are promising and show the possibility of preparing edible films from native potato starch and mucilage.
The contamination of water resources by effluents from various industries often contains heavy metals, which cause irreversible damage to the environment and health. The objective was to evaluate different biosorbents from the weed Rumex acetosella to remove metal cations in wastewater. Drying, grinding and sieving of the stems was carried out to obtain the biomass, retaining the fractions of 250 to 500 µm and 500 to 750 µm, which served to obtain the biosorbents in natura (unmodified), acidic, alkaline, and mixed. Proximal analysis, PZC, TOC, removal capacity, influence of pH, functional groups, thermal analysis, structural characteristics, adsorption isotherms, and kinetic study were evaluated. The 250 µm mixed treatment was the one that presented the highest removal percentages, mainly due to the OH, NH, -C-H, COOH, and C-O functional groups achieving the removal of up to 96.14% of lead, 36.30% of zinc, 34.10% of cadmium and 32.50% of arsenic. For contact times of 120 min and an optimum pH of 5.0, a loss of cellulose mass of 59% at 328 °C and a change in the surface of the material were also observed, which allowed for obtaining a topography with greater chelating capacity, and the Langmuir and pseudo-second order models were better fitted to the adsorption data. The new biosorbents could be used in wastewater treatment economically and efficiently.
Chocolate is a widely consumed product, due to the contribution of fats and antioxidant compounds; the addition of other components makes it possible to increase the content of polyunsaturated fatty acids, although they can affect its rheological properties. The influence of the partial addition of peanut paste and Sacha Inchi on the rheological and functional properties of dark chocolate was evaluated. Cocoa beans, peanuts, and Sacha Inchi were refined in order to obtain the cocoa paste (PC), peanut paste (PM), and Sacha Inchi paste (PSI). Then, mixtures between 0 to 20% of PM and PSI were formulated, and the rheological properties were evaluated at 30, 40, and 50 °C; these were adjusted to mathematical models. Functional groups were identified by FTIR in ATR mode, and it was observed that the partial addition of PM and PSI did not show significant changes in the shear stress and apparent viscosity of the mixture, although they did show dependence on temperature. The Herschel–Bulkley model showed a better adjustment (R2 > 0.999), reporting behavior index values, n < 1.0, and indicating pseudo-plastic behavior for pastes and formulations. The yield limit τy and the consistency index kH increased significantly with the addition of PM and PSI, but they decreased with increasing temperature. The activation energy show values between 13.98 to 18.74 kJ/mol, and it increased significantly with the addition of PM and PSI. Infrared analysis evidenced the presence of polyunsaturated fatty acids, coming mainly from PSI and PM. The addition of PM and PSI does not influence the rheological properties and allows for an increase in the content of polyunsaturated fatty acids.
The headwaters of the high Andean basin in Peru accumulate water from the mist, rain, snow, and hail, and it is transported superficially and underground to low-lying areas, mostly used for drinkable purposes. The natural water in these areas might be altered due to legal and illegal mining extraction. The aim of the study was to evaluate the water quality for human consumption. Seventeen water samples were examined from Andahuaylas (A), San Jerónimo (S), Talavera (T), and Chiara (CH) districts located between 2813 and 4004 m altitude in the Andes. We used physicochemical, microbiological, and metal parameters, and the results were compared to permissible levels established by the WHO and ECA-Peru to examine samples collected in the dry and rainy seasons in 2019. Application of principal component analysis (PCA) identified areas and conditioning parameters. Extractive mining activity influences the quality of springs due to the presence of metals, especially antimony (Sb), arsenic (As), cadmium (Cd), and lead (Pb), values of which are higher than values permissible for human consumption, being higher in the dry season (p < 0.05). In addition, the presence of cations and particulate matter affects physico-chemical parameters, for example turbidity. PCA showed that parameters for water characterization are season-independent, and water quality in the springs would be conditioned by the presence of metals, especially in Andahuaylas and Talavera zones, as well as the parameters that are associated with dissolved solids in the water (turbidity and fluorides). A frequent monitoring program of springs and groundwater is recommended, with the purpose to protect water from contamination and guarantee safe water availability in low-lying and urbanized areas.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.