The impact of pulsed light (PL) treatment on naturally occurring microorganisms, mycotoxins, and on physicochemical properties in red pepper powder was investigated. Powder samples were exposed to different PL treatments up to 61 pulses, with fluence ranging from 1.0 to 9.1 J/cm2. The highest fluence applied (9.1 J/cm2, 61 pulses, 20 s) resulted in 2.7, 3.1, and 4.1 log CFU/g reduction of yeasts, molds, and total plate counts (TPC), where initial microbial loads were 4.6, 5.5, and 6.5 log CFU/g, respectively. At the same fluence intensity, a maximum reduction of 67.2, 50.9, and 36.9% of aflatoxin B1 (AFB1), total aflatoxins (AF), and ochratoxin A (OTA) were detected, respectively. Proportional increase in temperature of the samples was observed from the absorbed PL energy, reaching maximum of 59.8°C. The inactivation of investigated microorganisms and mycotoxins followed first‐order kinetics (R2 > 0.95). The fluence intensity at 6.9 and 9.1 J/cm2 did not cause degradation, but rather a significant (p < .05) and apparent increase of total phenols. Total color difference (ΔE*) revealed only “slight differences,” compared to the untreated sample. In conclusion, higher reduction of microbial load and mycotoxins in red pepper powder could be achieved, when higher treatment intensity was applied. This suggests the PL as a potential technology for decontamination of red pepper powder and other spice powders.
Practical Applications
Pulsed light could be used for the decontamination of foods and reduce variety of spoilage and pathogenic microorganisms. Exposure of red pepper powder to different levels of doses proposed in this study demonstrates alternative approaches for microbial inactivation and mycotoxins degradation of the product. Moreover, pulsed light treatment is a young technology using short treatment times with potential feasibility. The technique can be of great interest for the scientific and industrial R&D community dealing with pulsed light technology, microbial, and mycotoxins inactivation kinetics, food safety, and quality control.
