We developed a simple, sensitive inner filter effect (IFE)-based fluorescent assay for sensing H2O2 and cholesterol. In the process, poly(vinylpyrrolidone)-protected gold nanoparticles (PVP-AuNPs) and fluorescent BSA-protected gold nanoclusters (BSA-AuNCs) were used as an IFE absorber/fluorophore pair. PVP-AuNPs can be a powerful absorber to influence the emission of the fluorophore, BSA-AuNCs, in the IFE-based fluorescent assays. That is due to the high extinction coefficient of AuNPs and the complementary overlap between the surface plasmon resonance (SPR) absorption of PVP-AuNPs and the excitation of BSA-AuNCs. The PVP-Au seeds, produced by directly mixing PVP with HAuCl4, were able to catalyze H2O2 to enlarge AuNPs. The SPR absorption of PVP-AuNPs was enhanced with an increased concentration of H2O2 and, subsequently, induced significant fluorescence quenching of BSA-AuNCs. The IFE-based fluorescent assay enabled the detection of H2O2 and generation of H2O2 in the presence of O2/cholesterol and cholesterol oxidase (ChOx) by the fluorescence response of BSA-AuNCs. The present IFE-based approach can detect H2O2 ranging from 1 to 100 μM with a detection limit of 0.8 μM and cholesterol ranging from 1 to 100 μM with a detection limit of 1.4 μM.

This paper describes an eco-friendly, one-pot strategy for the synthesis of water-soluble, high-quantum-yield gold nanoclusters (AuNCs) stabilized with 11-mercaptoundecanoic acid (MUA) on their surfaces. The as-prepared ultrasmall MUA-AuNCs (1.9 nm) exhibited a quantum yield (QY) of 13%, higher than those of most previously described thiol-protected AuNCs. We applied these MUA-AuNCs as a versatile probe to develop a fluorescence "turn-off" assay for sensing Hg(2+) ions as well as a fluorescence "turn-on" assay for sensing biothiols. The former assay operated through aggregation-induced fluorescence quenching upon interaction of the MUA-AuNCs with Hg(2+) ions in a buffer containing 2,6-pyridinedicarboxylic acid (PDCA); this probe provided high sensitivity and remarkable selectivity over other selected metal ions with a limit of detection (LOD) for Hg(2+) ions of 450 pM and linearity from 2 to 50 nM. In the latter assay for biothiols [i.e., cysteine (Cys), homocysteine (Hcy), glutathione (GSH)], the fluorescence of the Hg(2+)-MUA-AuNCs complexes was turned on because the affinity of Hg(2+) ions toward the SH group of the biothiols was greater than that toward the COOH groups of the MUA units on the surface of the AuNCs. This assay provided good linearity for the tested biothiols, ranging from 10 to 100 nM for Cys, from 10 to 100 nM for Hcy, and from 5 to 75 nM for GSH, with LODs of 5.4, 4.2, and 2.1 nM, respectively. In addition, these environmentally and biologically friendly AuNC probes tested satisfactorily against interference from a range of amino acids.

In this paper, we describe a simple one-pot method, employing l-3,4-dihydroxyphenylalanine (L-DOPA) as a reducing/capping reagent, for the synthesis of fluorescent gold nanoclusters (AuNCs). Within a short reaction time of 15 min (excluding the time required for purification), this strategy allows the fabrication of homogeneous AuNCs having the capability to sense ferric ions (Fe(3+)). The as-prepared AuNCs exhibited a fluorescence emission at 525 nm and a quantum yield of 1.7%. On the basis of an aggregation-induced fluorescence quenching mechanism, these fluorescent AuNCs offer acceptable sensitivity, high selectivity, and a limit of detection of 3.5 μM for the determination of Fe(3+) ions, which is lower than the maximum level (0.3 mg L(-1), equivalent to 5.4 μM) of Fe(3+) permitted in drinking water by the U.S. Environmental Protection Agency.

We herein report a straightforward soot‐based synthesis and characterization of the negatively charged, hydrophilic, photoluminescent nanocarbon. The photoluminescent nanocarbon was prepared by refluxing castor oil soot in nitric acid. The as‐obtained fluorescent nanocarbon shows multiple colors under UV exposure and was characterized with surface morphological and spectral studies. Additionally, the photoluminescence nature of the nanocarbon was tunable by changing the pH or the dilution factor. During the course of the investigation, it has been found that, the photoluminescence nature observed here is not attributed to the presence of poly aromatic hydrocarbons, but solely due to the trait of the fluorescent nanocarbon. These results indicate that interparticle surface plasmon resonance plays a key role in the exhibition of photoluminescence. Furthermore, the feasibility of photoluminescent nanocarbon as a plausible tool for cell imaging and electrochemical application of the oxidized nanocarbon has also been examined.