Mechanical properties of Hydroxyapatite (Ca10(PO4)6(OH)2, HA, still need to be modified to improve its function as dental filler or bone implant. HA is usually substituted with other metals to increase its mechanical strength. In this study, HA from chicken eggshells was substituted with La with a concentration variation of 1-3 wt % with a solid chemical reaction at a temperature of 1100 °C for 2 hours. The structure, morphology and mechanical strength of HA/La were characterized by XRD, SEM and Vicker Hardness, respectively. All HA samples adopt the P 63/m space group. Likewise, the IR spectra are similar to each other, which shows the formation of the HA structure, indicated by the presence of the -OH and PO43- groups. HA/La with the highest hardness value of 1.85 GPa is obtained from the 3 wt % La doping. The higher the La content added, the higher the hardness of the hydroxyapatite. The doping of 3% La increased the hardness of HA 17%.
<p>Hidroksiapatit (HA) Ca<sub>10</sub>(PO<sub>4</sub>)<sub>6</sub>(OH)<sub>2</sub> merupakan senyawa kalsium yang digunakan pada bidang ortopedi dan periodontal karena mineral ini merupakan penyusun utama dalam jaringan tulang dan gigi. Untuk dapat digunakan sebagai <em>graft</em> tulang dan tambal gigi, perlu dilakukan pengaturan kemurninan, kristalinitas dan ukurannya baik sebagai senyawa tunggal (HA) atau kompositnya. Pengaturan tersebut dapat dilakukan melalui proses sintesisnya. Pada penelitian ini HA disintesis dari CaO yang diisolasi dari cangkang telur ayam dengan metode kalsinasi pada suhu 1000 °C selama 5 jam, kemudian ditambahkan diammonium hidrogenfosfat. Sintesis komposit HA-La<sub>2</sub>O<sub>3</sub> dilakukan dengan dua metode hidrotermal dengan dua cara berbeda, yaitu secara <em>in-situ</em> dan <em>ex-situ</em>. Pada sintesis HA dengan metode <em>in-situ</em> dilakukan pencampuran bahan dalam satu tahap yaitu CaO, diammonium hidrogenfosfat dan 5% b/b lantanum oksida dengan perbandingan mol Ca/P=1,67 secara hidrotermal pada 230 °C selama 48 jam. Sintesis HA dengan metode <em>ex-situ</em> dilakukan dengan dua tahap yaitu mencampur CaO dan diammonium hidrogenfosfat untuk membentuk HA. Setelah HA terbentuk kemudian dilakukan sintesis komposit dengan penambahan lantanum oksida. Komposisi bahan dan kondisi reaksi metode <em>ex-situ</em> dilakukan dengan cara yang sama seperti metode <em>in-situ</em>. Hasil XRD dan FTIR menunjukkan terbentuknya komposit HA-La<sub>2</sub>O<sub>3 </sub>dari kedua metode yang dilakukan. Namun kemurnian, kristalinitas dan ukuran komposit menunjukan hasil yang berbeda. Karakteristik komposit yang dihasilkan dari metode <em>in-situ</em> lebih baik dibandingkan dengan metode <em>ex-situ</em>.</p>
Penggunaan aluminium sebagai bahan baku pembuatan jendela dan juga kerangka pintu perlu dilakukan proses lagi agar dapat memperbaiki sifat mekanik dan juga menambah nilai estetik. Salah satu cara perbaikan sifat mekanik dan menambah nilai estetik adalah anodizing. Anodizing merupakan suatu proses elektrolisis dengan prinsip dasar pembentukan lapisan oksida aluminium secara terkontrol melalui proses aerasi sehingga terbentuk lapisan oksida yang berpori. Tujuan dari penelitian ini adalah untuk mengetahui nilai kenaikan dan juga penurunan kekerasan Vickers dan struktur mikro permukaan aluminium pada proses anodizing dengan variasi arus listrik. Proses anodizing menggunakan variasi kuat arus listrik yaitu 0.5 ampere, 1 ampere, 1.5 ampere, 2 ampere, dan 2.5 ampere, waktu 20 menit dan konsentrasi asam sulfat sebesar 20%. Pengujian yang dilakukan yaitu uji komposisi kimia, uji kekerasan Vickers dan uji struktur mikro permukaan. Hasil pengujian komposisi kimia menunjukkan bahwa unsur Al yang dominan yaitu 99.30% yang masuk dalam spesifikasi aluminium seri 1XXX. Hasil pengujian kekerasan Vickers setelah proses anodizing didapatkan nilai yang terbaik pada penggunaan kuat arus 1.5 ampere yaitu sebesar 81.99 VHN.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.