We present a facile green approach to synthesize monodisperse graphene quantum dots (GQDs) of sizes 2–6.5 nm using rice grains as a carbon source.

We report current hysteresis in response to applied voltage in graphene quantum dots of average diameter 4.5 ± 0.55 nm, synthesized electrochemically using multiwalled carbon nanotubes. In response to step voltages, transient current decay, characteristic of deep and shallow level charge traps with time constants 186 ms and 6 s, is observed. Discharging current transients indicate charge storage of the order of 100 μC. Trap states are believed to arise due to the fast physisorption of external adsorbates, which are found to have a significant effect on charge transport and changes the resistance of the prepared device by an order of 3.

No abstract

Work function (WF) tuning of the contact electrodes is a key requirement in several device technologies, including organic photovoltaics (OPVs), organic light-emitting diodes (OLEDs), and complementary metal oxide semiconductor (CMOS) transistors. Here, we demonstrate that the WF of the gate electrode in an MOS structure can be modulated from 4.35 eV (n-type metal) to 5.28 eV (p-type metal) by sandwiching different thicknesses of reduced graphene oxide (rGO) layers between top contact metals and gate dielectric SiO2. The WF of the gate electrode shows strong dependence on the rGO thickness and is seen to be nearly independent of the contact metals used. The observed WF modulation is attributed to the different amounts of oxygen concentrations in different thicknesses of rGO layers. Importantly, this oxygen concentration can also be varied by the reduction extent of the graphene oxide as experimentally demonstrated. The results are verified by X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy analyses. The obtained WF values are thermally stable up to 800 °C. At further high temperatures, diffusion of metal through the rGO sheets is the main cause for WF instability, as confirmed by cross-sectional high-resolution transmission electron microscopy analysis. These findings are not limited to MOS devices, and the WF modulation technique has the potential for applications in other technologies such as OLEDs and OPVs involving graphene as conducting electrodes.