No abstract

The results of an investigation into the behaviour of thin-walled steel tubes filled with high strength concrete are presented. The main emphasis is placed on the level of ductility that can be achieved, considering the fact that neither high strength concrete nor thin steel tubes are individually able to absorb significant amounts of energy under cyclic loading. Results of 26 tests on specimens with a diameter of 152 mm and a wall thickness of 1.7 mm, filled with concrete of characteristic compressive strength ranging between 73 and 92 MPa, are reported. Load combinations on the specimens range from pure axial compression, through various combinations of axial load and bending, to pure bending. Three specimens were subjected to cyclic loading. Test results are compared with design models that are used in current code specifications. Key words: steel tubes, concrete, composite, beam-column, beam, column, experimental.

No abstract

Past and current seismic design provisions for steel structures in Japan are presented and compared with Canadian requirements. The performance of steel framed structures during the January 17, 1995, Hyogo-ken Nanbu earthquake is described. Numerous failures and examples of inadequate behaviour could be observed in buildings of various ages, sizes, and heights, and braced with different structural systems. In moment resisting frames, the damage included failures of beams, columns, beam-to-column connections, and column bases. Fracture of bracing members or their connections was found in concentrically braced frames. The adequacy of the current Canadian seismic design provisions is examined in view of the observations made. Key words: earthquake, seismic design, steel structures.

Results from monotonic and quasi-static cyclic tests on connections used in heavy timber construction are presented for two types of fasteners: steel bolts and glulam rivets. Bolted connections with three different diameter bolts, arranged in several configurations, as well as two different configurations of glulam rivet connections were tested. All configurations included a main glulam member and two steel side plates. For bolted connections, the seismic behaviour was found to be primarily dependent on the bolt slenderness ratio. Bolted connections with higher slenderness ratios (smaller diameter bolts) exhibited more ductile behaviour with considerable steel yielding and wood crushing before failure. Glulam riveted connections, which were designed in rivet failure mode, showed superior seismic performance when compared to bolted connections for similar design load levels. Riveted connections were also able to dissipate the highest amount of input energy before the failure was reached.Key words: timber connections, glulam rivets, bolts, ductility, timber, wood, braced frames, seismic performance, heavy timber construction.