We propose a model that considers several physical impairments in all-optical networks based on optical signal-to-noise degradation. Our model considers the gain saturation effect and amplified spontaneous emission depletion in optical amplifiers, coherent crosstalk in optical switches, and four-wave mixing in transmission fibers. We apply our model to investigate the impact of different physical impairments on the performance of all-optical networks. The simulation results show the impact of each impairment on network performance in terms of blocking probability as a function of device parameters. We also apply the model as a metric for impairment-constraint routing in all-optical networks. We show that our proposed routing and wavelength assignment algorithm outperforms two common approaches.

In this article we present a software to simulate Transparent Optical Networks (SIMTON). SIMTON is an eventdriven simulation software implemented in C++ which takes into account optical device characteristics for the evaluation of network blocking probability in wavelength routed transparent optical networks. The simulator uses a physical layer model that considers the following effects: device losses, fiber attenuation, four wave mixing, residual chromatic dispersion and polarization mode dispersion in optical fibers, gain saturation in optical amplifiers (Erbium Doped Fiber Amplifier), dependence of the amplified spontaneous emission noise with the input power in EDFA, in-band crosstalk in optical switches, and source spontaneous emission noise of the laser transmitter. By using SIMTON it is possible to adjust the parameters of the optical devices, as well as to choose the routing and wavelength assignment algorithm. Moreover, the tool has a graphical interface. We also present some examples of network analysis results obtained from SIMTON.

No abstract

No abstract

Resumo-Este artigo apresenta uma modelagem analítica para quantificar o ruído de emissão espontânea amplificada, gerado pelos amplificadoresópticos (amplificadores de potência, de linha e pré-amplificadores), em redesópticas elásticas transparentes. Adicionalmente,é proposta uma metodologia para se determinar a distância máxima entre amplificadoresópticos para garantir a transparência da rede. Diferentes formatos de modulação, taxas de transmissão, perdas nos dispositivos e ganhos nos amplificadores são considerados. Os resultados são apresentados para a metodologia proposta, bem como o desempenho de uma redeóptica elástica considerando diversas heurísticas para roteamento.

No abstract

No abstract

No abstract