As semiconductor features shrink in size and pitch, the extreme control of CD uniformity, MTT and image placement is needed for mask fabrication with e-beam lithography. Among the many sources of CD and image placement error, the error resulting from e-beam mask writer becomes more important than before. CD and positioning error by e-beam mask writer is mainly related to the imperfection of e-beam deflection accuracy in optic system and the charging and contamination of column. To avoid these errors, the e-beam mask writer should be designed taking into account for these effects. However, the writing speed is considered for machine design with the highest priority, because the e-beam shot count is increased rapidly due to design shrink and aggressive OPC. The increment of shot count can make the pattern shift problem due to statistical issue resulting from e-beam deflection error and the total shot count in layout. And it affects the quality of CD and image placement too.In this report, the statistical approach on CD and image placement error caused by e-beam shot position error is presented. It is estimated for various writing conditions including the intrinsic e-beam positioning error of VSB writer. From the simulation study, the required e-beam shot position accuracy to avoid pattern shift problem in 22nm node and beyond is estimated taking into account for total shot count. And the required local CD uniformity is calculated for various e-beam writing conditions. The image placement error is also simulated for various conditions including e-beam writing field position error. Consequently, the requirements for the future e-beam mask writer and the writing conditions are discussed. And in terms of e-beam shot noise, LER caused by exposure dose and shot position error is studied for future e-beam mask writing for 22nm node and beyond.
As semiconductor features shrink in size and pitch, there are strong needs for an advanced mask writer which has better patterning quality. Among various requirements for next photomask writer, we have focused on the requirements of ebeam size and position accuracy for hp 32nm and beyond generation.At the era of DPT, EUV, and complex OPC, the photomask is required to have extreme control of critical dimension (CD). Based on simulation and experiment, we present the e-beam requirements for advanced mask writer, in view point of stability and accuracy. In detail, the control of e-beam size in mask writer should be decreased to 0.5nm because the size error of e-beam gives rise to large CD error according to the high complexity of mask pattern. Furthermore, the drift error of beam position should be smaller than 1nm to obtain the tight pattern placement error and to minimize the edge roughness of mask pattern for the era of computational lithography and EUV lithography.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.